High Output Alternator for Chrysler Town & Country (1990-1995) 3.3L 3.8L

High-Amp Charging High Output Alternator for 1990-1995 Chrysler Town & Country (AS)

What it Does: The high output 200-amp alternator replaces the low-output factory charging unit on the 1990-1995 Town & Country to stabilize operating voltage and power auxiliary high-draw electrical accessories without idle voltage sag.

The Stock Chrysler Town & Country Charging Deficits and Thermal Bottlenecks

Factory Chrysler AS-platform minivans left the assembly line equipped with light-duty OEM alternators rated around 90 to 120 amps. While sufficient for baseline factory accessories, these aging OE units suffer from rapid heat soak within the tight transverse engine bay, causing internal diode breakdown, heavy rotor resistance, and severe voltage drop down to 11.8V during hot idle conditions. Added loads such as secondary A/C blowers, high-output audio amplifiers, and auxiliary lighting overwhelm the original stator windings, causing dim dash displays, dead battery cycles, slow starter cranking, and premature regulator burnouts under continuous high-amperage duty.

The Engineering Solution

Engineered as a true bolt-on upgrade, this 200A unit utilizes high-temperature heavy-gauge copper stator windings and precision-balanced rotors to maximize current production across low RPM thresholds. Sealed, low-friction bearings resist rotational wear and high-temperature breakdown under constant drive-belt tension. An integrated solid-state voltage regulator reliably maintains 13.5V to 14.5V output without erratic spiking, while the housing matches OEM mounting ears, factory pulley alignment, and the original wiring plug configuration to eliminate bracket fabrication or custom splicing.

What's Included

• 1 High Output Alternator (200 Amp, 12V, Internal Regulator, Part # 13307-200A)

Technical Specifications

Compatibility

• 1990-1995 Chrysler Town & Country 3.3L V6
• 1994-1995 Chrysler Town & Country 3.8L V6

Frequently Asked Questions & Fitment Warnings

Does this fit the AS Town & Country?

Yes, this is a direct fit for the 1990-1995 Chrysler Town & Country equipped with the Chrysler 3.3L or 3.8L V6 engine.

Do I need to upgrade the factory charging wiring when installing this unit?

To safely handle the full 200-amp capacity without line resistance or heat buildup, upgrading the main battery positive charge wire and chassis ground cables via a "Big 3" wiring upgrade is strongly recommended.

The Chrysler Reliability Standard

Maintain consistent electrical stamina and continuous high-load towing readiness across your extended road trips without the risk of accessory cutouts or dead-battery stranding.