High Output Alternator for Chrysler Sebring (2007-2010) 2.4L
Couldn't load pickup availability
- Guaranteed Fitment
- Performance Tested
- Lifetime Warranty
Want it soon? Order within
High-Amp 350A Alternator for 2007-2010 Chrysler Sebring (JS)
What it Does: The 350A high-output alternator replaces the factory charging unit on the 2007-2010 Sebring to eliminate voltage drop and deliver sustained electrical current for high-draw systems.
The Stock Chrysler Sebring Charging Limitations
Factory alternators installed on the Chrysler JS platform typically yield only 115 to 140 amps. When secondary loads like high-power audio amplifiers, aftermarket lighting, or air ride compressors are added, the OEM diode bridge suffers extreme heat soak. Under high thermal loads, the factory unit drops below 12.8 volts at idle, starving sensitive CAN-bus electronics, causing headlight flicker, and accelerating battery cell degradation.
The Engineering Solution
Constructed in the USA, this heavy-duty 350-amp alternator utilizes high-efficiency heavy-gauge copper stator windings and an oversized 12-diode heavy-duty rectifier to withstand continuous high-amperage output. Its balanced rotor assembly prevents brush bounce at elevated RPM, maintaining a constant 14.4-volt charge across the rev range. Designed with a bolt-in casing, it aligns directly with the factory accessory drive bracket while dramatically lowering internal operating temperatures compared to OEM units.
What's Included
- 1x 350 Amp High Output Alternator
Technical Specifications
| Fitment | 2007-2010 Chrysler Sebring |
|---|---|
| Engine / Chassis | 2.4L World Engine (ED3) / JS |
| Stock Output | 173 hp / 166 lb-ft |
| Replaces OEM Part # | 04801477AA, 4801477AA, A3TJ2581, AL6457X, 04801323AB, 04801323AC, 04801323AD, 4801323AB, 4801323AC, 4801323AD, 11231, 11231N, A2TJ0481, A2TJ0481ZC, 15278, 90273353, 90273353N, A3TJ2581ZC, 15736, 11228N, 11228R, 11231R, 11228, 11231-350A |
Compatibility
- 2007-2010 Chrysler Sebring 2.4L Sedan
- 2008-2010 Chrysler Sebring 2.4L Convertible
Frequently Asked Questions & Fitment Warnings
Does this fit the JS Sebring?
Yes, this is a direct fit for the 2007-2010 Chrysler Sebring equipped with the 2.4L World Engine (ED3) on the JS chassis.
Do I need to upgrade my battery cables with this unit?
Yes, a 1/0 AWG "Big 3" wiring upgrade is required to safely support the full 350-amp flow without creating excessive circuit resistance.
The Chrysler Caliber
Built to handle rigorous daily driving conditions, this unit ensures reliable electrical power delivery for modified Chrysler JS platforms without risk of voltage drop or computer instability.
Fitment
Fitment
Warranty
Warranty
