Header Exhaust Intake Titanium Thermal Heat Tape Ties

This titanium-color glass fiber heat wrap is a simple, low-cost way to cut under-hood heat. Wrap it around headers, exhaust pipes or intake tubes to keep heat inside the pipe and away from nearby wiring, hoses, fuel lines and body panels. One 5 meter (16.4 ft) roll comes with 4 ties to secure the ends.

Why Wrap Your Headers, Exhaust or Intake?

An exhaust system generates a lot of heat, which can damage surrounding components and, in extreme cases, even lead to a fire. Heat wrap acts as an insulator and reduces heat transfer to nearby parts such as fuel lines and wiring harnesses. On the intake side, wrapping the intake tube helps protect it from engine bay heat, so the air going into the engine stays cooler.

Key Features

• Glass fiber construction in a titanium color (color may vary)
• High temperature rating: insulation temperature up to 900-1200 degrees
• 5 meter (16.4 ft) roll: just the right amount to fit most ram air intakes
• Includes 4 ties to fasten the wrap
• Universal use: works on all internal combustion engines, including gas, diesel, rotary, 2-stroke and turbocharged

Specifications

• Material: Glass fiber
• Color: Titanium (may vary)
• Length: 5 meters (16.4 ft)
• Width: 51 mm (about 2 in)
• Thickness: 1.5 mm
• Insulation temperature: up to 900-1200 degrees

Package Includes

• 1 x Heat wrap roll, 5 m (16.4 ft)
• 4 x Ties

Installation Notes

No instructions are included. Start at one end of the pipe, overlap each pass as you wrap, and secure both ends with the included ties. Please wear disposable gloves when using this product, as glass fiber can irritate skin.

Ships only to the USA.

Common Questions

Will this heat wrap fit my vehicle's exhaust headers or air intake?
Yes. This is a universal 5-meter (16.4 ft) roll of 2-inch wide heat wrap that works on headers, exhaust pipes, and intake tubes across all gas, diesel, rotary, 2-stroke, and turbocharged engines.

What is included in the package?
The kit includes one 5-meter (16.4 ft) roll of titanium-color glass fiber heat wrap (51 mm wide, 1.5 mm thick) and 4 ties to secure the ends.

How much temperature can this wrap handle?
The glass fiber material is rated for insulation temperatures up to 900-1200 degrees.

How do I install the heat wrap?
Start at one end of the pipe, overlap each pass as you wrap around the tube, and fasten both ends with the 4 included ties. Wear disposable gloves during installation, as glass fiber can irritate your skin.

Is one roll enough to wrap an air intake tube?
Yes, a single 5-meter (16.4 ft) roll is sized to cover most ram air intake tubes.