Exhaust Tips Carbon Fiber for BMW X5 X6 X7 (2019-2026) 3.0L 4.4L

High-Temp Carbon Fiber Exhaust Tips for 2019-2026 BMW X5, X6, X7 (G05, G06, G07)

What it Does: The Carbon Fiber Exhaust Tips replace the factory outlet finishers on the 2019-2026 BMW X5, X6, and X7 to upgrade rear aesthetic styling while shielding bumper trim from corrosive exhaust gasses.

The Stock BMW X5, X6, and X7 Rear Finisher Limitations

The factory rear exhaust finishers on the G05, G06, and G07 platforms rely on standard chrome-plated or basic coated metal shrouds integrated into the lower valence. Under the high thermal cycles generated by the turbocharged B58 3.0L inline-six and twin-turbocharged N63/S68 4.4L V8 engines, stock outlets are susceptible to carbon soot pitting, heat discoloration, and clear coat failure. Additionally, factory exhaust trims lack true dual-wall thermal isolation, allowing ambient exhaust heat to radiate directly onto surrounding lower bumper plastics.

The Engineering Solution

These upgraded exhaust tips feature genuine high-weave carbon fiber outer shells bonded to corrosion-resistant stainless steel inner sleeves. Engineered with an air gap between the outer composite shell and inner steel wall, this dual-wall architecture acts as a thermal barrier, minimizing heat transfer to bumper diffusers and preventing composite resin delamination. The smooth internal bore maintains consistent laminar gas velocity at the tailpipe exit without altering system backpressure or sound frequency, providing a precision slip-on or direct bolt-on fit over the factory exhaust tailpipes.

What's Included

• Exhaust tip set (as pictured for this listing)
• Mounting hardware (as included with the listing)

Technical Specifications

Compatibility

• 2019-2026 BMW X5 3.0L (G05)
• 2019-2026 BMW X5 4.4L (G05)
• 2019-2026 BMW X6 3.0L (G06)
• 2019-2026 BMW X6 4.4L (G06)
• 2019-2026 BMW X7 3.0L (G07)
• 2019-2026 BMW X7 4.4L (G07)

Frequently Asked Questions & Fitment Warnings

Does this fit the G05, G06, and G07 X5, X6, and X7?

Yes, this is a direct fit for the 2019-2026 BMW X5, X6, and X7 equipped with the B58 3.0L and N63/S68 4.4L engines. This kit is not compatible with models outside the specified 3.0L and 4.4L configurations or other model years.

Is cutting or welding required to mount these exhaust tips?

Depending on factory valence geometry, these tips install via integrated clamp-on hardware or direct slip-on fitment, but checking inlet diameter, tip alignment, and bumper clearance prior to final tightening is required.

The BMW Precision Standard

Engineered to meet rigorous European performance standards, these carbon fiber exhaust tips maintain factory acoustic profiles with zero ECU recalibration or check engine lights.