Skip to product information
1 of 6

Engine and Transmission Mount Kit for Mercedes Benz C-Class (2008-2015) 3.0L 3.5L



Regular price $222.95
Sale price $222.95 Regular price
Shipping calculated at checkout.
  • Guaranteed Fitment
  • Free Shipping, Lower 48 States
  • Lifetime Warranty

Want it soon? Order within

I18n Error: Missing interpolation value "end_date" for "Ends on {{ end_date }}"

Direct-Fit Engine and Transmission Mount Kit for 2008-2015 Mercedes Benz C-Class (W204)

What it Does: This three-piece engine and transmission mount kit restores factory powertrain alignment and vibration isolation on 2008-2015 Mercedes Benz C-Class (W204) models equipped with naturally aspirated M272 3.0L and M276 3.5L V6 engines.

The Stock Mercedes Benz C-Class Hydraulic Mount Failure

Factory hydro-mounts on the W204 sit directly adjacent to the exhaust manifolds, exposing elastomer membranes to continuous thermal cycling and heat soak. Over time, rubber vulcanization hardens and cracks, leaking internal damping fluid and collapsing the mount core under M272 and M276 V6 torque loads. Once collapsed, powertrain geometry shifts downward, overloading the rear mount while risking subframe contact, wiring harness strain, or false P0325 knock sensor triggers.

Common Symptoms of a Failing OEM Mount Kit

  • Takeoff & Shift Clunking: Excess engine pitch causes audible metallic thuds against the subframe during acceleration or gear engagement.
  • Cabin Vibration & Harshness: Ruptured hydraulic chambers lose isolation, transmitting raw V6 firing pulses into the steering column and floorpan.
  • Exhaust & Harness Strain: Collapsed mounts drop the engine lower in the cradle, stressing exhaust flex joints and coolant lines.

The Direct-Fit 3-Piece Mount Kit Solution

This complete three-piece kit replaces both engine mounts and the transmission mount simultaneously to eliminate uneven torsional preload across the W204 subframe. Built with high-durometer elastomer compounds bonded to corrosion-resistant housings, each mount replicates factory hydraulic damping rates and OEM stud geometry. Direct replacement of OE part numbers A2042404317, A2042400917, and A2122400418 restores crankshaft-to-driveshaft alignment without modifying factory crossmembers or brackets.

What's Included

  • 2 Engine Mounts
  • 1 Transmission Mount
  • Note: Hydraulic lines, heat shields, and fasteners beyond what is pre-installed on the mounts are not included.

Technical Specifications

Fitment 2008-2015 Mercedes Benz C-Class
Engine / Chassis M272 3.0L & 3.5L / M276 3.5L V6 / W204
Stock Engine Output 228–302 hp / 221–273 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # A2042404317, A2202401818, A2042400917, 2042400917, 204240431764, 2122400418, A2122400418, at10576

Compatibility

  • 2008-2011 Mercedes Benz C-Class 3.0L Flex Naturally Aspirated
  • 2008-2011 Mercedes Benz C-Class 3.0L Gas Naturally Aspirated
  • 2012-2014 Mercedes Benz C-Class 3.5L Flex Naturally Aspirated
  • 2008-2015 Mercedes Benz C-Class 3.5L Gas Naturally Aspirated

Frequently Asked Questions & Fitment Warnings

Does this fit the W204 C-Class?

Yes. This is a direct fit for the 2008-2015 Mercedes Benz C-Class equipped with the M272 3.0L/3.5L or M276 3.5L naturally aspirated V6 engine. This kit is not listed for Bluetec diesel engines; confirm year, model, and displacement before ordering.

Does this kit include just one side, or all three mounts?

All three mounts are included. You get both left and right engine mounts plus the transmission mount to keep the W204 powertrain aligned and avoid leaving a tired mount in service.

Are heat shields included, and what installation prep is required?

No heat shields, hydraulic lines, or separate fasteners are included. Installation requires safely supporting the engine and transmission, unbolting the worn units, transferring factory shields, and torquing fasteners to vehicle specifications.

The Mercedes Benz Precision Standard

Maintaining exact drivetrain geometry on the W204 platform prevents driveline harshness, exhaust stress, and false ECU knock sensor feedback. Replacing all three mounts together restores quiet, factory-spec isolation across the 3.0L and 3.5L V6 powerband.




Fitment

Make

Mercedes Benz

Engine Size

  • 3.0L
  • 3.5L

Year

  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015

Warranty

All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Engine and Transmission Mount Kit for Mercedes Benz C-Class (2008-2015) 3.0L 3.5L

$222.95