Cold Air Intake Kit for Nissan Pathfinder (2005-2012) with 4.0L V6 Engine Red
Couldn't load pickup availability
- Guaranteed Fitment
- Performance Tested
- Lifetime Warranty
Want it soon? Order within
Shop safely
Secure checkout with trusted payment providers.
Feel the immediate rush of power as your Nissan Pathfinder’s 4.0L V6 finally breathes free, eliminating that sluggish factory feel. Experience the satisfaction of improved throttle response and a robust engine note, transforming every drive into an exhilarating journey.
Performance Cold Air Intake Kit for Nissan Pathfinder (2005-2012) VQ40DE 4.0L V6
The factory air intake system on your 2005-2012 Nissan Pathfinder 4.0L V6 (VQ40DE engine) is notorious for its restrictive design. Engineered primarily for noise reduction and cost-efficiency, the stock air box and narrow intake tube create a significant bottleneck, starving your engine of the crucial airflow it needs to produce maximum horsepower and torque. This restriction leads to diminished throttle response, reduced fuel efficiency, and limits your Pathfinder’s true potential, especially during towing, off-roading, or spirited highway driving.
This high-performance cold air intake kit directly addresses these limitations by replacing the restrictive OEM components with a free-flowing, optimized design. Featuring a high-velocity induction pipe, a robust heat shield, and an advanced high-flow air filter, this system is engineered to draw in a larger volume of cooler, denser air. By delivering a consistent supply of oxygen-rich air to your VQ40DE, you’ll unlock immediate gains in horsepower and torque, enjoy crisper throttle response, and even see improvements in fuel economy, all while giving your Pathfinder a more aggressive, sporty engine growl.
Why You Need This Upgrade
- Unleash Hidden Power: Boosts your Nissan Pathfinder’s horsepower and torque by up to 10%, providing a significant and noticeable increase in overall engine performance.
- Optimized Cold Air Flow: The integrated heat shield effectively isolates the air filter from hot engine bay temperatures, ensuring only cool, dense air reaches your 4.0L V6 for maximum combustion efficiency.
- Sharper Throttle Response: Eliminates the inherent resistance of the stock intake system, resulting in immediate and crisp throttle pedal feedback for faster acceleration and more dynamic driving.
- Improved Fuel Efficiency: By optimizing the air-to-fuel ratio and engine breathing, this cold air intake promotes a more complete and efficient burn, potentially leading to better miles per gallon.
- Aggressive Engine Sound: Replaces the muted factory intake with an open induction design, enhancing your Pathfinder’s natural engine sound with a deeper, more aggressive growl under acceleration.
- Durable, Long-Lasting Construction: Crafted from high-grade lightweight piping and premium materials, ensuring excellent resistance to corrosion and wear for reliable performance over the long haul.
Technical Specifications
| Fitment | 2005-2012 Nissan Pathfinder (4.0L V6 VQ40DE Engine) |
| Factory Stats | Stock: 266 HP / 288 lb-ft |
| Installation | Direct Bolt-On / Moderate (1-2 hours) |
Replaces These OEM Applications
Compatible Vehicles:
- 2005 Nissan Pathfinder 4.0L V6
- 2006 Nissan Pathfinder 4.0L V6
- 2007 Nissan Pathfinder 4.0L V6
- 2008 Nissan Pathfinder 4.0L V6
- 2009 Nissan Pathfinder 4.0L V6
- 2010 Nissan Pathfinder 4.0L V6
- 2011 Nissan Pathfinder 4.0L V6
- 2012 Nissan Pathfinder 4.0L V6
Upgrade Your Pathfinder’s VQ40DE Power Today
Don’t let a restrictive factory air intake hold back your Nissan Pathfinder’s VQ40DE engine. Transform your driving experience with increased horsepower, improved throttle response, and a more aggressive sound that matches its rugged capability. Shop with confidence knowing that PerformanceChipTuning.com delivers the best cold air intake parts with fast shipping and expert support for your 2005-2012 Nissan Pathfinder.
Fitment
Fitment
|
Make |
Nissan |
|---|---|
|
Engine Size |
|
|
Year |
|
Installation & Tools
Installation & Tools
The Wrench Time
- Estimated Time: 45-60 Minutes
- Difficulty: 3/10 - Straightforward bolt-on, but requires patience with brittle plastic and delicate sensors.
Tools You Will Need
- 10mm deep socket, extension, and ratchet
- 8mm socket or nut driver
- #2 Phillips screwdriver
- Needle-nose pliers
- 3mm or 4mm Allen wrench (typical for aftermarket MAF hardware)
Veteran VQ40DE owners know the factory rubber intake tract is notorious for tearing near the throttle body, causing unmetered air leaks. But during this install, your biggest enemy is the Mass Air Flow (MAF) sensor. The factory screws strip easily, and the sensor element itself is incredibly fragile. Do NOT touch the sensor wire with your bare hands, or you’ll be buying a $150 replacement. Also, watch out for the hidden 10mm bolt securing the factory resonator down inside the fender well.
Phase 1: Removing the Factory Part
- Disconnect the Battery: Always start by disconnecting the negative battery terminal using a 10mm wrench to prevent check engine lights on your 2005-2012 Nissan Pathfinder 4.0L.
- Unplug the MAF Sensor: Locate the MAF sensor on the factory airbox tube. Depress the plastic tab and pull the harness straight back. Do not yank the wires. Tuck it safely out of the way.
- Disconnect the PCV Breather: Use needle-nose pliers to pinch the spring clamp holding the factory PCV breather hose to the intake tube. Slide the clamp back and firmly twist the rubber hose to pull it off the plastic nipple.
- Loosen Factory Clamps: Use an 8mm socket to loosen the hose clamps securing the factory intake tube to the throttle body and the airbox.
- Extract the Factory Airbox: Unbolt the factory airbox assembly. You will need a 10mm socket and an extension to reach the mounting bolt on the fender side. Once the bolts are out, pull the entire airbox and lower resonator assembly straight up with firm pressure to pop it off the chassis grommets.
Phase 2: Installing the Red Cold Air Intake Kit
- Transfer the MAF Sensor: Carefully extract the factory MAF sensor using a #2 Phillips screwdriver. Gently insert it into the precision-machined housing on your new Red Cold Air Intake tube. Secure it using the provided Allen bolts and a 3mm or 4mm Allen wrench. Snug them down, but do not overtighten and crack the plastic flange!
- Install the Throttle Body Coupler: Slide the silicone step-down coupler onto the VQ40 throttle body. Secure the throttle body side by tightening the provided T-bolt or worm clamp with your 8mm socket.
- Mount the Heat Shield: Drop the new heat shield into the R51 chassis factory airbox location. Bolt it down into the OEM mounting holes using your 10mm socket. Make sure the rubber edge trim is pressed firmly into place to seal against the hood.
- Position the Intake Tube and Filter: Slide the red intake pipe into the throttle body coupler. Attach the new high-flow cone filter to the end inside the heat shield. Route the provided PCV silicone breather hose from the engine valve cover to the welded nipple on the new intake pipe. Tighten all remaining hose clamps.
- Reconnect and Relearn: Plug the MAF sensor harness back in until it clicks. Reconnect your negative battery terminal with a 10mm wrench. On the first startup, do not touch the gas pedal for 20 seconds; let the ECU adjust to the massive increase in airflow volume at idle.
Disclaimer: This is a general guide provided for the 2005-2012 Nissan Pathfinder 4.0L. Always refer to your factory service manual for exact torque specifications and safety procedures.
Warranty
Warranty
All products are backed by our Limited Lifetime Warranty. We stand by our quality. [See terms]

Shopping Safely
At our Shopify store, we prioritize your safety and security. Here's how we ensure a secure shopping experience:
1. Secure Transactions: We use advanced encryption to protect your personal and payment information, ensuring it is safely transmitted and safeguarded.
2. Trusted Payment Gateways: Our store integrates with trusted payment gateways, ensuring your transactions are processed securely and efficiently.
3. Data Privacy: Your privacy is our top priority. We follow strict data protection policies to keep your personal information confidential and secure.
4. Secure Platform: Shopify provides robust security features and continuous monitoring against vulnerabilities, ensuring a safe shopping environment.
5. Verified Merchants: We are a verified merchant on Shopify, committed to providing authentic and high-quality products.
6. Transparent Policies: Our clear return, refund, and shipping policies provide peace of mind, knowing we stand behind our products.
7. Customer Support: Our dedicated customer support team is ready to assist with any concerns or questions you may have.
Shop confidently at our Shopify store, where your safety and satisfaction are our top priorities.
$179.95