Cold Air Intake for Mitsubishi Lancer (2008-2014) 2.0L 2.4L Engines - Red

Draw cooler, denser air into your Lancer's engine with a polished aluminum cold air intake system engineered to deliver 7-10% horsepower gains, sharper throttle response, and an aggressive sporty tone. Complete bolt-on kit with washable filter included.

Feed Your Four-Cylinder the Cold Air It Needs to Perform

The 2008-2014 Mitsubishi Lancer offers a solid foundation for enthusiasts seeking an affordable and reliable performance platform, but the factory intake system leaves significant performance on the table. Designed to meet noise regulations and cost constraints, the restrictive factory airbox pulls warm air from inside the engine bay, reducing air density and limiting your engine's ability to produce maximum power. The result is muted throttle response and a lack of the aggressive intake sound that makes driving more engaging.

This cold air intake system addresses those limitations head-on. Unlike short ram intakes that draw air from the hot engine compartment, this system repositions the high-flow filter to pull cooler, denser air from outside the engine bay. Cooler air contains more oxygen molecules per cubic inch, supporting more efficient combustion and translating directly into measurable power gains. Combined with polished aluminum piping that provides smooth, unrestricted airflow, this kit delivers 7-10% increases in horsepower and 6-8% gains in torque, with noticeable improvements in throttle response throughout the low and mid RPM range where you spend most of your driving time.

Key Features at a Glance

• Cold Air Induction Design: Draws cooler, denser air from outside the engine bay for maximum oxygen content and power potential, unlike hot air intakes that pull from inside the engine compartment.
• Polished Aluminum Piping: Lightweight, corrosion-resistant construction with smooth mandrel bends provides an unrestricted airflow path while reducing weight and adding a premium aesthetic to your engine bay.
• High-Flow Cone Filter: Washable and reusable cone-style air filter maximizes surface area for superior airflow and filtration, eliminating the recurring cost of disposable paper filters.
• Aggressive Intake Tone: Open-element design amplifies the natural sound of your engine under acceleration, delivering a deep, sporty tone that enhances the driving experience.

How It's Used: Installation & Fitment

This is a complete cold air intake kit designed for straightforward installation in under an hour using basic hand tools. The system fits both 2.0L and 2.4L Lancer models and includes every component needed for a proper installation—no additional parts required. Simply remove your factory airbox assembly using screwdrivers and socket wrenches, install the new polished aluminum intake tube and cone filter using the included mounting hardware, and reconnect your battery. After installation, disconnect your battery terminal briefly to allow your ECU to recalibrate and recognize the increased airflow. No cutting, welding, or permanent modifications necessary.

Product Durability & Material Details

The intake piping is manufactured from aircraft-grade aluminum alloy, chosen for its exceptional strength-to-weight ratio and superior resistance to heat and corrosion. The polished finish provides a mirror-like appearance that elevates the look of your engine bay while naturally resisting oxidation and maintaining its shine over time. Mandrel-bent construction ensures consistent wall thickness throughout every curve, eliminating weak points and turbulence. The high-flow cone filter features precision-engineered filtration media designed to trap contaminants while maximizing airflow—washable and reusable for the life of your vehicle, making this both a performance upgrade and a long-term cost-saving investment.

Your Benefits at a Glance

• Proven Power Increases: Experience 7-10% gains in horsepower and 6-8% improvements in torque, with the most noticeable benefits during acceleration and highway passing.
• Improved Low and Mid-Range Response: Enhanced throttle response throughout the RPM range where you drive most often, making the car feel more eager and responsive in everyday situations.
• Better Fuel Efficiency Potential: Cooler, denser air supports more efficient combustion, which can contribute to modest improvements in fuel economy during steady-state cruising.
• Show-Quality Engine Bay: Polished aluminum finish transforms your engine compartment with a clean, premium appearance that stands out at car meets.
• Lifetime Filter Savings: Washable cone filter eliminates the recurring expense of disposable factory filters—clean and reuse indefinitely.

Extra Info & Specifications

Fitment:

• Mitsubishi Lancer 2.0L L4 Non-Turbo Engine: 2008–2014
• Mitsubishi Lancer 2.4L L4 Non-Turbo Engine: 2009–2014 (2008 international)
• Compatible with both Manual and CVT transmissions

Product Specifications:

• Intake Tube Material: Mandrel-Bent Aluminum
• Finish: Mirror-Polished Aluminum
• Filter Type: High-Flow Washable Cone Filter (Reusable)
• Design: Cold Air Intake System (draws air from outside engine bay)
• Installation Time: Under 60 minutes

Performance Specifications:

• Horsepower Gain: 7-10%
• Torque Gain: 6-8%
• Optimized for improved throttle response in low and mid RPM range
• Compatible with factory ECU calibration—no tuning required

Package Includes:

• Complete Cold Air Intake System
• Polished Aluminum Intake Tube
• High-Flow Washable Cone Air Filter
• All Necessary Mounting Hardware and Brackets
• Silicone Couplers and Stainless Steel Clamps
• Installation Instructions

Installation & Maintenance Notes:

• Basic hand tools required (screwdrivers, socket wrenches)
• Complete bolt-on installation—no additional parts needed
• Recommended: Disconnect battery terminal briefly after installation to allow ECU to recalibrate
• Filter maintenance: Clean and re-oil as needed based on driving conditions (cleaning kit sold separately)
• Always disconnect battery when performing any engine work

Common Questions

Will this cold air intake fit my 2008-2014 Mitsubishi Lancer?
Yes. It is engineered to fit 2008–2014 Mitsubishi Lancer models equipped with naturally aspirated 2.0L or 2.4L L4 engines and either a manual or CVT transmission.

Will this fit a Lancer Ralliart or Evolution 2.0L Turbo?
This system is built specifically for naturally aspirated 2.0L and 2.4L four-cylinder Lancer models.

What is included in the box?
The kit comes complete with a polished mandrel-bent aluminum intake tube, a washable high-flow cone air filter, silicone couplers, stainless steel clamps, mounting hardware and brackets, and installation instructions.

Do I need a tune after installing this intake?
The system works with your factory ECU calibration without custom tuning. Briefly disconnecting the battery terminal after installation is recommended so the ECU can recalibrate to the increased airflow.

How long does installation take and what tools are needed?
Installation takes under 60 minutes using basic hand tools like screwdrivers and socket wrenches, with no cutting, welding, or permanent modifications required.