Performance Cold Air Intake System for Mercedes-Benz 1.6T / 2.0T (2015–2018)

This high-flow cold air intake system is designed to improve the airflow efficiency of the Mercedes-Benz M270 and M274 turbocharged engines. By replacing the restrictive factory components with a streamlined induction path, this kit delivers cooler, denser air to the engine. This results in sharper throttle response, measurable power gains, and a more pronounced induction sound under acceleration.

The system features an integrated heat shield designed to isolate the air intake from engine bay heat soak, maintaining lower intake air temperatures. The durable black finish provides a professional appearance while ensuring long-term resistance to heat and corrosion in the engine bay environment.

Key Features

• Measured Performance Gains: Dyno-tested increases of up to +9.5 HP and +13.7 Nm of torque at 4,900 RPM.
• Enhanced Airflow: Maximizes air volume to the engine for improved combustion efficiency and turbo response.
• Thermal Isolation: Integrated heat shield reduces intake temperatures by blocking radiant engine heat.
• Audible Induction Sound: Provides a deeper, more aggressive engine note during acceleration.
• Durable Construction: Finished in a high-temperature black coating for durability and a clean look.
• Direct Fitment: Designed as a bolt-on upgrade for the specified 1.6L and 2.0L turbocharged gasoline engines.

Vehicle Fitment

Fits the following Mercedes-Benz gasoline models only (Not compatible with Diesel):

• C-Class (W205): 2015–2018 C180 (1.6T), C200 (2.0T), C300 (2.0T)
• E-Class (W213): 2017–2018 E200, E300 (2.0T)
• E-Class (W212): 2016–2018 E300 (2.0T)
• GLC-Class: 2016–2018 GLC300 (2.0T)

Product Specifications

• Engine Types: 1.6L / 2.0L Turbocharged Inline-4 (Gasoline)
• System Type: Cold Air Intake with Heat Shield
• Finish: Performance Black
• Installation Style: Bolt-on

Package Includes

• High-flow performance air filter
• Intake induction piping
• Heat shield assembly
• All necessary mounting hardware and couplers as pictured

Important Notes

• Compatibility: This kit is designed for gasoline engines only; it does not fit diesel variants.
• Installation: Professional installation is recommended to ensure airtight seals and proper sensor integration.
• Maintenance: Periodically check and clean the high-flow filter to ensure optimal airflow and filtration.

Installation Tip

Unplug the car battery's NEGATIVE GROUND CABLE before installing this product. After the installation is complete, leave the cable disconnected for at least 60 seconds. This allows the vehicle's ECU to reset and properly calibrate for the increased airflow, which helps optimize performance gains and prevents potential check engine light errors. Always perform installation on a completely cool engine to ensure safety.