Cold Air Intake for Hyundai Tiburon GT / SE 2.7L V6 (2003–2008) - Performance & Airflow Upgrade

This cold air intake system is designed to replace the factory air box on 2003–2008 Hyundai Tiburon GT and SE models equipped with the 2.7L V6 engine. The system reduces intake restriction by using T-6061 billet aluminum piping with a polished finish and a high-quality micro cotton cone air filter. This results in improved throttle response, enhanced airflow efficiency, and measurable gains in horsepower and torque across the RPM range.

The intake uses larger diameter aluminum tubing compared to the factory intake tract, creating a less restrictive path for incoming air. The T-6061 billet aluminum construction provides superior strength and durability with a scratch-resistant coating. The washable and reusable cone air filter maintains adequate filtration while reducing restriction compared to factory paper elements.

Vehicle Fitment

• 2003–2008 Hyundai Tiburon GT (2.7L V6 Engine)
• 2003–2008 Hyundai Tiburon SE (2.7L V6 Engine)
• Fits GT and SE models with 2.7L V6 engine only

Performance & Design

Airflow Optimization: The system is engineered to improve airflow efficiency by eliminating restrictive elements in the factory air box assembly. The T-6061 aluminum piping provides better airflow compared to factory components, allowing the engine to draw air more efficiently. Actual performance improvements will vary based on vehicle condition, elevation, ambient temperature, and existing modifications.

Throttle Response: The reduced intake restriction allows the engine to breathe more efficiently during acceleration. This results in improved throttle response and power delivery throughout the RPM range. The improved combustion efficiency may contribute to fuel economy gains during steady-state driving conditions.

Construction & Materials

T-6061 Billet Aluminum Construction: The intake piping is manufactured from industrial-grade T-6061 billet aluminum with a scratch-resistant coating for superior strength and durability. The material provides corrosion resistance and maintains structural integrity across engine bay temperature ranges. The polished finish provides both aesthetic appeal and additional protection against oxidation.

Filter Design: The high-quality micro cotton cone air filter is washable and reusable. The filter provides adequate filtration to protect engine components from dust and debris while maintaining lower restriction than factory paper elements. The cone design increases filter surface area for improved airflow capacity.

Features & Components

• T-6061 billet aluminum intake piping with polished finish
• Scratch-resistant coating for durability
• High-quality micro cotton washable cone air filter
• Reusable filter reduces long-term maintenance costs
• Direct replacement for factory air box assembly
• Reduces intake restriction for improved airflow
• Enhances throttle response across RPM range
• Produces deeper intake sound under acceleration
• OEM approved manufacturing standards
• Materials meet or exceed OEM requirements

What's Included

• T-6061 billet aluminum intake pipe (polished)
• High-quality micro cotton cone air filter
• Mounting hardware and clamps
• Installation components

Installation

• Direct replacement for factory air box system
• Uses existing factory mounting points
• No cutting or drilling required
• Installation time approximately 45–60 minutes
• Basic hand tools required (screwdrivers, socket wrenches)
• Professional installation highly recommended
• Installation guides not included

Installation Note:
Professional installation is highly recommended to ensure proper fitment and secure mounting. After installation, disconnect the negative battery terminal for approximately 30 seconds to allow the engine control unit to reset. This allows the ECU to recalibrate fuel delivery and ignition timing parameters to optimize performance with the modified airflow characteristics. Always disconnect the battery before performing any engine bay work. The ECU will continue to adapt during normal driving operation.

Filter Maintenance

Inspection Schedule: Inspect the air filter every 5,000 miles and clean if necessary. Driving conditions such as dusty environments, spirited driving, or heavy traffic may require more frequent inspection and cleaning.

Cleaning Procedure: Remove the filter from the intake tube. Gently tap the filter to remove loose debris. Apply an appropriate air filter cleaning solution to both the inside and outside of the filter element, working it into the filter media. Allow the cleaner to soak for approximately 10 minutes. Rinse the filter thoroughly with low-pressure water from the clean side out, continuing until water runs clear. Shake off excess water and allow the filter to air dry completely in a clean environment. Once fully dry, apply air filter oil evenly to the filter media according to product specifications. Allow the oil to wick through the filter material for approximately 20 minutes before reinstalling. Ensure the filter is completely dry before applying oil, as moisture will prevent proper oil absorption.

Compatibility Requirements

Engine Verification: This cold air intake system is designed specifically for 2003–2008 Hyundai Tiburon GT and SE models equipped with the 2.7L V6 engine only. Verify your vehicle is the GT or SE model with the 2.7L V6 engine before purchase to ensure proper fitment. This system is not compatible with 4-cylinder Tiburon models.

This cold air intake system provides improved airflow characteristics for the 2.7L V6 Tiburon engine while maintaining reliable filtration through a washable, reusable micro cotton cone filter. The T-6061 billet aluminum construction with polished finish and scratch-resistant coating provides superior strength and durability. The system is manufactured to OEM approved standards with materials that meet or exceed OEM requirements. Professional installation is highly recommended to ensure proper fitment and operation.