Cold Air Intake for GEO Tracker (1995-1997) 1.6L

High-Flow Cold Air Intake for 1995-1997 GEO Tracker (SE416)

What it Does: The Cold Air Intake replaces the restrictive factory airbox and baffled snorkel on the 1995-1997 GEO Tracker to maximize volumetric efficiency and deliver crisper throttle response.

The Stock GEO Tracker Intake Restriction

From the factory, the SE416 chassis relies on an enclosed plastic airbox mated to a tortuous, ribbed intake snorkel designed primarily for sound suppression rather than flow velocity. On the Suzuki-derived G16B 1.6L SOHC 16-valve engine, this convoluted routing introduces parasitic pumping losses and severe boundary layer turbulence. Additionally, the thin factory plastic ducting is vulnerable to heat soak inside the compact engine bay, elevating intake air temperatures (IAT) and dampening low-to-mid RPM torque during low-speed trail crawls and highway grade pulls.

The Engineering Solution

This intake system streamlines airflow via a mandrel-formed, polished T-6063 aluminum intake tube that minimizes flow separation and resistance. By pairing rigid aluminum construction with a high-flow, washable cone air filter, the system increases total filter surface area to reduce pressure drop across the intake tract. Durable rubber transition couplers and stainless steel worm-gear clamps maintain positive airtight sealing under engine torque-twist. The assembly directly integrates your factory Mass Air Flow (MAF) sensor between the filter element and runner to preserve clean fuel trim tables without requiring ECU recalibration.

What's Included

• 1 Aluminum Intake Tube (T-6063 Polished)
• 1 High-Flow Cone Air Filter
• 2 Rubber Couplers
• 5 Stainless Steel Clamps
• Mounting bracket hardware

Technical Specifications

Compatibility

• 1995-1997 GEO Tracker Base (1.6L 4-Cylinder, 2WD & 4WD)
• 1995-1997 GEO Tracker LSi (1.6L 4-Cylinder, 2WD & 4WD)
• Compatible with both manual and automatic transmission models

Frequently Asked Questions & Fitment Warnings

Does this fit the SE416 Tracker?

Yes, this is a direct fit for the 1995-1997 GEO Tracker equipped with the G16B 1.6L engine. This kit does not fit 1999-2003 Chevrolet Tracker models or 2.0L engine configurations.

Is a new Mass Air Flow sensor required for installation?

No, the system is designed to reuse your factory OEM mass air flow sensor positioned directly between the cone filter and the aluminum runner.

The GEO Trail-Ready Standard

Engineered for lightweight 4x4 trail demands, this intake eliminates factory plastic failure points and provides immediate throttle recovery when navigating off-camber obstacles, washboard trails, and steep climbs.