Cold Air Intake for Dodge Charger (2011-2019) 3.6L Engine - Black

High-Flow Cold Air Intake for 2011-2019 Dodge Charger (Pentastar V6 / LD)

Precision airflow management for the 3.6L Pentastar: Replaces the restrictive OEM air box and baffled tubing to lower intake temperatures and improve overall volumetric efficiency.

The Stock Charger Airflow Limitations

The factory LD chassis intake system is engineered primarily for acoustic dampening rather than maximum performance. The OEM setup utilizes a closed plastic air box paired with corrugated rubber tubing. This heavily baffled design creates localized boundary layer turbulence, significantly reducing the velocity of incoming air before it reaches the throttle body. Furthermore, the standard paper panel filter becomes a severe bottleneck under heavy load. Combined with ambient under-hood temperatures, this restrictive induction tract subjects the 3.6L Pentastar to severe heat soak, which forces the ECU to retard ignition timing and sap low-end torque.

The Engineering Solution

This intake system systematically eliminates OEM flow restrictions. The core upgrade is a 3.5-inch large-diameter intake tube, finished with a thermal-resistant black wrinkle powder coat. The smooth interior geometry eliminates turbulence, while the external wrinkle finish aids in dissipating radiant engine bay heat. Filtration is handled by a massive 6-inch high-flow dry filter element. Unlike oiled variants, this dry media prevents mass airflow sensor oil fouling while maximizing CFM capability. A custom-fitted black wrinkle heat shield isolates the filter from exhaust and radiator heat, ensuring the engine draws strictly dense, ambient air for optimized combustion.

Technical Specifications

Compatibility

• 2011-2019 Dodge Charger SE (3.6L V6)
• 2011-2019 Dodge Charger SXT (3.6L V6)
• 2018-2019 Dodge Charger GT (3.6L V6)
• 2011-2019 Dodge Charger Pursuit (3.6L V6)

The Mopar Performance Standard

Removing the intake restrictions on the Pentastar V6 yields sharper throttle response, sustained torque delivery, and a pronounced induction growl under heavy load. Note: Professional installation is highly recommended as instructions are not included.

Common Questions

Will this fit my 2016 Charger SXT 3.6L?
Yes. It fits 2011-2019 Dodge Charger SE, SXT, GT and Pursuit models with the 3.6L Pentastar V6.

What size is the intake tube?
A 3.5-inch large-diameter tube with a heat-resistant black wrinkle powder coat, paired with a 6-inch high-flow filter.

Do I need to oil the filter?
No. It is a dry filter, so there is no oil to coat the mass airflow sensor.

Are installation instructions included?
Instructions are not included, so professional installation is recommended.

What will I notice?
Sharper throttle response, stronger torque delivery and a deeper induction growl when you get on it.