Cold Air Intake for Chevy Camaro SS (2010-2015) 6.2L Engine - Chrome Black

Cold Air Intake System for Chevrolet Camaro SS 6.2L V8 (2010–2015) Enhanced Power & Performance

Replace the restrictive factory air intake system with this cold air intake kit designed for the 2010–2015 Chevrolet Camaro SS equipped with the 6.2L LS3 V8 engine. The factory airbox and intake tubing limit airflow to the engine, which restricts power output and throttle response. This intake system addresses those limitations with a polished chrome aluminum intake pipe, high-flow air filter, and heat shield that work together to improve airflow, reduce intake air temperatures, and enhance engine performance.

The LS3 engine responds well to improved breathing. By removing restrictions in the intake path and providing cooler, denser air to the throttle body, this system allows the engine to produce more power across the RPM range. The result is noticeable gains in horsepower and torque, improved throttle response, and a more aggressive intake sound—all while maintaining reliability for daily driving and spirited use.

Vehicle Fitment

• 2010–2015 Chevrolet Camaro SS – 6.2L V8 (LS3 / L99)
• Compatible with both automatic and manual transmissions

System Components & Construction

The intake pipe is constructed from polished aluminum for corrosion resistance and heat dissipation. The chrome finish provides a clean appearance in the engine bay while the smooth interior walls minimize turbulence and pressure drop. The high-flow washable air filter uses multiple layers of oiled cotton gauze to capture contaminants while allowing maximum airflow. Unlike disposable paper filters, this filter can be cleaned and reused for the life of the vehicle.

A reflective heat shield surrounds the filter to block radiant heat from the engine, helping maintain cooler intake air temperatures. Cooler air is denser, which improves combustion efficiency and power output. Silicone couplers with stainless steel clamps provide secure, vibration-resistant connections between the intake pipe and factory mounting points.

Included Components

• Polished chrome aluminum air intake pipe
• High-flow washable air filter
• Reflective heat shield
• Silicone couplers with stainless steel clamps
• Complete mounting hardware

Performance Characteristics

• Improved airflow reduces intake restriction compared to factory system
• Heat shield helps maintain consistent intake air temperatures
• Washable air filter provides long-term value and sustainability
• Polished aluminum construction resists corrosion and heat
• Smooth intake pipe design minimizes turbulence
• Direct replacement for factory air intake system

Expected Performance Gains

Performance improvements vary based on driving conditions, elevation, and individual vehicle specifications. Typical gains include improved throttle response throughout the RPM range, more aggressive intake sound under acceleration, and potential 10-12 horsepower gain and 8 foot lbs of torque, with up to 3 MPG increase (results vary by vehicle, fuel and driving habits) in gas savings. increases when measured on a dynamometer.The improved airflow also allows the engine to operate more efficiently, which can contribute to improved fuel economy during steady-state cruising conditions.

Installation

• Direct replacement for factory air intake system
• Uses factory mounting locations and connections
• Installation typically requires 60 minutes or less with basic hand tools
• No cutting or permanent modifications required
• Professional installation recommended for proper fitment and performance
• Downloadable installation guide link provided below

This cold air intake system provides a straightforward path to improved engine performance for the fifth-generation Camaro SS. The combination of unrestricted airflow, reduced intake temperatures, and quality construction makes it a practical performance modification for both daily drivers and track-focused builds.

INSTALLATION CLICK HERE

Common Questions

Will this cold air intake fit my 2010–2015 Chevy Camaro SS with an automatic transmission?
Yes. This system fits all 2010–2015 Chevrolet Camaro SS models with the 6.2L V8 engine, and it is compatible with both automatic and manual transmissions.

Will this fit other Camaro trims or engines?
This intake kit is built specifically for the fifth-generation 2010–2015 Chevrolet Camaro SS equipped with the 6.2L V8 engine.

What comes in the box?
The kit includes a polished chrome aluminum intake pipe, a high-flow washable oiled cotton gauze air filter, a reflective heat shield, silicone couplers with stainless steel clamps, and complete mounting hardware.

What kind of horsepower and torque gains can I expect?
By replacing the restrictive factory airbox and tubing to deliver cooler, denser air with less turbulence, this intake provides a potential gain of 10–12 horsepower and 8 lb-ft of torque along with sharper throttle response.

Does installation require any cutting or permanent modifications?
The system is a direct bolt-on replacement that uses factory mounting locations and connections. Installation typically takes 60 minutes or less with basic hand tools and requires no cutting or permanent modifications.