Cold Air Intake for Chevy Camaro & Firebird (1993-1995) 3.4L Engine

Boost your fourth-gen Camaro or Firebird's 3.4L V6 with this complete cold air intake kit—engineered for the L32 engine that powered the first three years of the sleek new F-body design.

More Airflow for the Often-Overlooked L32 V6

The 1993-1995 Camaro and Firebird marked the dramatic fourth-generation redesign—the striking new styling featured composite body panels and improved aerodynamics that made the '95 Camaro one of the most aerodynamic production cars of its era. The base L32 3.4L V6 produced 160 horsepower and 200 lb-ft of torque, making it "peppy enough" with the manual transmission according to longtime owners. Research shows the L32 was replaced by the 3.8L in 1996 due to the larger engine's more refined nature and 200 horsepower output, making the 3.4L a three-year-only engine. Enthusiast forums confirm that GM's restrictive factory intake and heads left significant performance on the table—one owner gained 27 rear-wheel horsepower just by upgrading to less-restrictive 1996+ intake components.

This cold air intake addresses the factory restriction by replacing your stock airbox with T-6063 aluminum piping and a high-flow washable filter. The result is up to 10% gains in horsepower and torque with improved throttle response—measurable improvements that complement bolt-on modifications like exhaust and headers. The intake draws cooler air for better combustion efficiency, and you'll get that deeper, more aggressive V6 tone that adds character. Installation requires accessing from underneath (remove lower splash cover or wheel well liner) and takes 10-30 minutes once you understand the routing. The washable filter eliminates recurring OEM replacement costs.

Key Features

• Up to 10% Power Gains: Improved airflow delivers noticeable horsepower and torque increases with sharper throttle response
• T-6063 Aluminum Piping: Lightweight, durable construction with quality finish resists corrosion
• Washable, Reusable Filter: Clean and re-oil the filter—no disposable replacements needed, saving money long-term
• Enhanced V6 Sound: Deeper intake tone under acceleration adds engagement to the driving experience
• Quick Installation: 10-30 minute installation time once routing is understood (access from underneath required)

Fitment & Installation Notes

• 1993-1995 Chevrolet Camaro with 3.4L V6 (L32 engine code)
• 1993-1995 Pontiac Firebird with 3.4L V6 (L32 engine code)
• Compatible with both 5-speed manual (Borg-Warner T5) and 4-speed automatic (4L60/4L60-E)
• NOT compatible with 1996+ models (3.8L V6) or V8 engines

Important Installation Notes:

1. Remove factory air filter box and resonator (black plastic box near radiator)
2. Install intake pipe into factory black rubber intake tube
3. Attach air filter to shorter pipe
4. Install assembly from bottom of engine bay by removing lower splash cover OR driver-side wheel well liner
5. If pipe appears short, adjust the coupler by spacing pipes inside it to extend effective length
6. Refer to product photos for proper routing
7. After installation, disconnect battery terminal briefly to allow ECU to relearn airflow

Package Includes: T-6063 aluminum intake piping, washable high-flow air filter, all necessary couplers and clamps for installation.

Common Questions

Will this cold air intake fit my 1993-1995 Camaro or Firebird with the 3.4L V6?
Yes, this intake kit is engineered specifically for 1993-1995 Chevrolet Camaro and Pontiac Firebird models equipped with the 3.4L V6 (L32) engine, with either the 5-speed manual or 4-speed automatic transmission.

Will this kit fit a 1996 Camaro with the 3.8L V6 or a V8 model?
This system is built specifically for 1993-1995 models with the 3.4L L32 V6 engine and is configured only for that engine layout.

What is included in the package?
The kit includes T-6063 aluminum intake piping, a washable and reusable high-flow air filter, and all necessary couplers and clamps for installation.

How long does installation take and what is required?
Installation takes about 10 to 30 minutes once you know the routing. You will remove the stock airbox and resonator and install the assembly from underneath by removing the lower splash cover or driver-side wheel well liner.

Does the air filter need to be replaced over time?
The included high-flow filter is washable and reusable—simply clean and re-oil it during routine maintenance instead of buying disposable replacements.