Cold Air Intake for Cadillac Escalade ESV EXT (2007-2008) 6.2L

High-Flow Cold Air Intake System for 2007-2008 Cadillac Escalade (GMT900)

What it Does: The AF Dynamic Cold Air Intake replaces the restrictive factory airbox and corrugated ducting on the 2007-2008 Escalade to deliver denser, cooler airflow and sharper throttle response to the 6.2L V8.

The Stock Cadillac Escalade Airbox Restriction

Factory GMT900 intake tracts prioritize noise suppression over volumetric efficiency. The OEM assembly features convoluted accordion bellows, integrated sound baffles, and an enclosed plastic airbox that traps engine bay heat. Under sustained loads or towing, radiant heat transfer elevates intake air temperatures (IAT), causing the factory ECM to pull ignition timing, dulling throttle response and choking the top-end breathing capacity of the L92 engine.

The Engineering Solution

This bolt-on kit replaces the stock tract with smooth, mandrel-bent aluminum piping finished in durable matte black powder coat. Coupled with an enclosed aluminum heat shield lined with reflective thermal insulation matting, the system isolates incoming air from high underhood temperatures. Intake air is drawn through a high-flow, oiled cotton gauze filter engineered for up to 95% particulate filtration efficiency. Heavy-duty 4-ply reinforced silicone couplers, silicone vacuum lines, and stainless steel hardware eliminate airflow turbulence and withstand continuous thermal cycling without cracking or collapsing under high vacuum.

What's Included

• 1 x Washable and reusable high-flow air filter
• 1 x Matte black powder-coated aluminum intake pipe
• 1 x Matte black powder-coated aluminum heat shield
• 1 x Reflective aluminum thermal insulation mat
• 1 x 4-ply silicone straight coupler
• 1 x 4-ply silicone elbow coupler
• Silicone vacuum hoses
• Stainless steel button-head bolts, washers, locknuts, and band clamps
• Installation instructions

Technical Specifications

Compatibility

• 2007-2008 Cadillac Escalade Base 6.2L V8
• 2007-2008 Cadillac Escalade ESV 6.2L V8
• 2007-2008 Cadillac Escalade EXT 6.2L V8

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT900 Escalade?

Yes, this is a direct fit for the 2007-2008 Cadillac Escalade equipped with the L92 6.2L engine. Note: Will not fit models equipped with a mechanical engine-driven cooling fan; vehicles must utilize electric cooling fans.

Will this trigger a Check Engine Light (CEL) or require an aftermarket tune?

No, this intake works with the factory calibration by retaining the factory mass airflow sensor housing diameter without throwing lean codes.

The Cadillac Utility Standard

Built to handle heavy-payload hauling and towing duties, this cold air intake provides the thermal isolation and unrestricted airflow required to maintain consistent torque and lower cylinder head stress across the entire rev band.