Cold Air Intake for Dodge Challenger (2011-2018) 6.4L Engine

Maximize Volumetric Efficiency in Your 392 HEMI Dodge Challenger

Who It’s For: Designed specifically for Dodge Challenger owners running the legendary 392 HEMI (Apache) engine who want more than just the factory-muted experience.

The Problem: The stock 392 HEMI is a massive naturally aspirated powerplant, but it’s often suffocated by a factory airbox designed for noise suppression rather than flow. The original plastic intake uses accordion-style ribbing that creates air turbulence and is prone to heat soak, which pulls timing and kills horsepower during spirited driving.

The Solution: We engineered this kit to optimize the breathing of the 6.4L V8. By utilizing mandrel-bent T304 aluminum piping, we provide a smooth, high-velocity path for air to reach the throttle body. This eliminates the restrictions found in the stock Apache engine setup, allowing for quicker throttle response and a significantly more aggressive engine note under load.

Why This is the Ultimate Upgrade

• Enhanced Flow Dynamics: The T304 lightweight aluminum piping reduces air turbulence compared to factory plastic, allowing the engine to pull in air more efficiently for up to a 10% gain in output.
• Superior Thermal Management: Aluminum dissipates heat faster than heavy stock components, helping to maintain lower intake air temperatures (IATs) and preventing power loss due to heat soak.
• Million-Mile Filtration: The included high-flow cone filter is fully washable and reusable, engineered to trap particulates without sacrificing the CFM (cubic feet per minute) requirements of a high-displacement V8.

Technical Specifications

Compatibility & OEM Reference

Fits the Following Vehicles:

• 2011 Dodge Challenger 6.4L V8 SRT8
• 2012 Dodge Challenger 6.4L V8 SRT8
• 2013 Dodge Challenger 6.4L V8 SRT8
• 2014 Dodge Challenger 6.4L V8 SRT8
• 2015 Dodge Challenger 6.4L V8 Scat Pack / SRT 392
• 2016 Dodge Challenger 6.4L V8 Scat Pack / SRT 392
• 2017 Dodge Challenger 6.4L V8 Scat Pack / SRT 392
• 2018 Dodge Challenger 6.4L V8 Scat Pack / SRT 392

Interchange Part Numbers:

2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 6.4L, V8, SRT8, SCAT PACK, 392 HEMI

The Performance Promise

Expert Tip: After installation, we recommend disconnecting your battery terminal for 10-15 minutes. This allows the PCM (Power Control Module) to reset its long-term fuel trims and “re-learn” the increased airflow volume from your new intake, ensuring you get the most out of the upgrade from the very first drive.

Buy with confidence. Backed by real automotive experts and fast shipping.