Air Intake Kit for Land Rover LR4 (2014-2016) V6 Supercharged

High-Flow Air Intake Kit for 2014-2016 Land Rover LR4

This dual performance direct air intake kit replaces both restrictive factory air boxes to lower intake air temperatures and increase volumetric efficiency.

The Stock LR4 Airflow Restriction

The factory intake system on the L319 LR4 is engineered primarily for NVH (Noise, Vibration, and Harshness) reduction rather than optimal airflow. The OEM dual air boxes utilize dense paper panel filters and baffled intake tracts that create significant turbulence and pressure drop before the air reaches the supercharger. This restriction becomes a severe choke point, inducing heat soak and starving the AJ126 3.0L V6 supercharger of the dense, cold air required for sustained power delivery, especially during heavy load, towing, or prolonged acceleration.

The Engineering Solution

This direct-fit dual performance air intake kit eliminates the factory bottlenecks by replacing both OEM air boxes with high-flow conical filters. By utilizing custom-engineered heat shields, the system effectively isolates the intake charge from engine bay heat, preventing the ECU from pulling timing due to high IATs (Intake Air Temperatures). The optimized piping creates a smooth, laminar airflow path directly to the throttle body, maximizing the efficiency of the Roots-type supercharger. This bolt-on upgrade installs in approximately 30 minutes and yields a proven 9-11 wheel horsepower increase, delivering sharper throttle response and enhanced supercharger whine without requiring custom tuning. It is supplied with all necessary high-flow filters, custom heat shields, heavy-duty clamps, and mounting hardware.

Technical Specifications

Compatibility

• 2014 Land Rover LR4 3.0L V6 Supercharged
• 2015 Land Rover LR4 3.0L V6 Supercharged
• 2016 Land Rover LR4 3.0L V6 Supercharged

The Land Rover Precision Standard

Engineered to complement the robust capability of the L319 chassis, this system maintains strict sensor tolerances to ensure CEL-free operation. Whether navigating technical off-road trails, towing heavy loads, or requiring additional passing power on the highway, this intake delivers reliable performance and precise MAF readings without sacrificing daily drivability.

Common Questions

Will this fit my 2015 LR4 HSE?
Yes. It fits all 2014-2016 Land Rover LR4 models with the 3.0L supercharged V6.

Does it fit the 2010-2013 LR4 with the 5.0L V8?
This kit is made for the 2014-2016 3.0L supercharged V6.

Does it replace both airboxes?
Yes. Both factory airboxes are replaced with high-flow cone filters and custom heat shields.

Do I need a tune?
No. It is a bolt-on upgrade that works without custom tuning.

How long does installation take?
About 30 minutes.