Air intake for BMW 540i G30 G31 GEN2 B58 (2017-2023) 3.0L

High-Flow Cold Air Intake for 2017-2023 BMW 5 Series (B58/G30/G31)

What it Does: Replaces the restrictive factory airbox and accordion-style plastic intake tract with a high-volume aluminum system designed to lower intake air temperatures (IATs) and improve throttle response on B58-equipped G-Series vehicles.

The Stock 5 Series Restriction

The OEM BMW airbox is engineered primarily for cabin acoustics and low-frequency noise suppression rather than peak volumetric efficiency. The factory pleated paper filter and baffled housing create significant pressure drops at higher RPMs, limiting the twin-scroll turbocharger's ability to breathe. Furthermore, the factory plastic housing is highly susceptible to heat soak during extended idling or spirited driving, which leads the DME to pull ignition timing as intake temperatures rise, ultimately robbing the engine of its rated power output.

The Engineering Solution

This performance intake system utilizes a CNC-bent 6061 aluminum intake pipe that provides a smooth, oversized internal diameter to maintain laminar airflow and maximize velocity into the turbo inlet. The system features a 360-degree inverted cone reusable filter, which significantly increases the available surface area for filtration and air volume compared to the stock flat panel. To combat thermal transfer, an integrated heat shield isolates the intake charge from the radiant heat of the engine bay. These mechanical optimizations result in dyno-verified gains of up to 16hp and 28nm of torque while producing a mechanical, sporty induction note without requiring a custom ECU recalibration.

Technical Specifications

Compatibility

• BMW 5 Series • 2017-2023 G30 G31 GEN2 B58 BMW 540i including xDrive

The G31 540i Touring is a non-US model. Not for the 2024+ G60 5 Series.

The BMW Precision Standard

Built for the high-tolerance requirements of the G30 chassis, this intake system maintains factory sensor scaling to ensure perfect MAF sensor readings and no CEL (Check Engine Light). The kit is a direct bolt-on solution that respects the precision engineering of the B58 engine while allowing the turbocharger to operate at higher efficiency levels.

Common Questions

Will this fit my 2021 540i xDrive?
Yes. It fits 2017-2023 BMW 540i and 540i xDrive (G30) with the B58 3.0L.

Does it fit the 2024 540i?
No. The 2024 5 Series is the new G60; this intake is made for the 2017-2023 G30/G31.

Do I need a tune?
No. It keeps factory MAF scaling and works without an ECU recalibration.

What comes in the box?
The 6061 aluminum intake pipe, 360-degree inverted cone reusable filter, heat shield and mounting hardware.

Will it cause a check engine light?
It keeps factory sensor scaling for accurate MAF readings, so it is designed to run without a CEL.