Turbo Kit for Volkswagen Golf Jetta VR6 24V (1999-2008) 2.8L 3.2L

Complete intercooled T3/T4 turbo package for the 1999–2008 Volkswagen Golf and Jetta with the 2.8L / 3.2L VR6 24-valve. It pairs a cast T3 manifold with a hybrid T3/T4 turbo, 35mm external wastegate, front-mount intercooler, boost controller, blow-off valve, oil cooler, turbo timer and fuel-system parts in one box. Most installs keep A/C and power steering, and it works with manual or automatic transmissions. Expect about 50–100 hp over stock at a conservative 8–10 psi with a proper tune. The 390+ hp figure is the hardware's ceiling at 20–30 psi with a built engine, fueling and supporting mods, not a dyno result for a stock car.

Why this kit

• T3/T4 hybrid turbo with a .57 trim compressor and .50 / .63 A/R housings
• Cast street manifold with large primaries and a thick T3 flange that carries the turbo's weight
• Front-mount aluminum intercooler, full 2.5" piping kit and 35mm external wastegate
• Oil cooler kit, slim cooling fan and electronic turbo timer for street-friendly cool-down
• Adjustable fuel pressure regulator with gauge, billet fuel filter and oil catch can included

Package Includes

• (1) T3/T4 hybrid turbocharger with oil fitting gaskets and mounting studs
• (1) Cast turbo exhaust manifold, T3 flange, ported and polished
• (1) Front-mount aluminum intercooler, 2.5" inlet / outlet, under 2% pressure drop
• (1) Aluminum intercooler piping kit: (2) 2.5" straight pipes, (2) 90°, (2) 60°, (2) 45° bends, (2) 2.5" 90° silicone couplers, (6) 2.5" straight silicone couplers, (16) stainless worm-gear clamps
• (1) Turbo oil line kit: 77" feed line, 36" angled feed, 18" 5/8" high-temp 550 psi return, T fitting, fittings, gaskets and hardware
• (1) 35mm external wastegate, 2-bolt flange, with gaskets and flanges
• (1) Adjustable boost controller with install kit
• (1) Blow-off valve with install kit
• (1) Slim reversible cooling fan
• (1) Electronic turbo timer with LED display and wiring
• (1) Oil cooler kit: 15-row aluminum cooler, billet adapter plate with 1/8" NPT sensor ports, (2) 52" braided stainless lines
• (1) Adjustable fuel pressure regulator with gauge
• (1) Billet aluminum high-flow fuel filter, -6AN fittings
• (1) Oil catch can with install kit
• (1) Coolant sensor bung, 38mm

Turbocharger Specs

• Type: T3/T4 hybrid, wet-float bearings, balanced
• Compressor: .57 trim wheel, .50 A/R housing, 3" inlet, 2" outlet
• Turbine: .63 A/R housing, T3 inlet flange
• Oil inlet: 1/8" NPT

Exact Fitment — Volkswagen

• 2002–2008 Golf / GTI / R32 (MK4 / MK5) 2.8L or 3.2L VR6 24V
• 1999–2004 Jetta (MK4) 2.8L VR6 24V
• VR6 24-valve engines only (DOHC)
• Not for VR6 12V (MK3 / Corrado AAA / AFP) — that platform uses a separate kit
• Not for 1.8T, 2.0L 8V, 1.9L TDI, 2.5L or later 2.0T engines

Not Included

• Chassis-specific downpipe and exhaust beyond the turbo
• Larger injectors, fuel pump and ECU tune (required)
• Clutch upgrade, boost gauge and wideband
• Oil-pan return bung if your setup needs one

Installation Notes

• Professional installation strongly recommended. The intercooler piping is universal, so expect some cutting and fitting
• The manifold is street cast, not equal-length tubular: stronger and more affordable, with a different spool character
• Oil return must drain by gravity; prime the turbo with oil before first start and check for leaks at feed and return
• Blow-off valve flanges are installed at your discretion
• Keep boost around 8–10 psi until fuel and tune are upgraded, and let the turbo timer handle cool-down
• Confirm clearance for the front-mount intercooler and oil cooler during mock-up

FAQs

Does this fit a VR6 12V or Corrado? No. It is for the 24-valve VR6 in 1999–2008 Golf / Jetta only. The 12V kit is a separate listing.

How much power will it make? About 50–100 hp over stock at 8–10 psi on a healthy stock engine with a proper tune. 390+ hp is the hardware ceiling with a built engine and full supporting mods.

Can I keep A/C and power steering? Most installs keep both; confirm clearance during mock-up.

Manual or automatic? Fits either when the engine matches.

Is it plug-and-play? No. You still need injectors, a fuel pump, an ECU tune and some pipe fitting.