Passer au contenu du produit
1 sur 7

Starter for Jeep Commander (2006-2010) 3.7L



Prix normal $68.95
Prix promotionnel $68.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

High-Torque Direct-Fit Starter Motor for 2006-2010 Jeep Commander (XK)

What it Does: The replacement starter motor delivers high-torque cranking to reliably turn over the PowerTech 3.7L V6 on 2006-2010 Jeep Commander vehicles, eliminating intermittent no-starts and slow engine roll-over.

The Stock Jeep Commander Starter Failure

The factory starter on the XK platform is positioned low along the engine block where it is exposed to thermal cycling from nearby exhaust runners and trail debris. Over time, radiant heat soak degrades internal solenoid contacts and causes brush wear within the motor housing. This breakdown manifests as single-click or rapid-click no-starts, sluggish cranking despite full battery voltage, and dragging bendix drives that can strip teeth on the flexplate ring gear.

The Engineering Solution

This replacement unit utilizes a 12-volt Permanent Magnet Gear Reduction (PMGR) architecture designed to generate high breakaway torque with reduced current draw compared to conventional direct-drive units. Built with heavy-duty solenoid contacts, heat-resistant copper field windings, and a case-hardened bendix drive gear, this unit ensures immediate pinion engagement and consistent cranking rpm in extreme thermal ranges. Every unit matches the OEM XK mounting flange geometry and factory terminal studs for direct bolt-on installation.

What's Included

  • 1 High-Torque Starter Motor

Technical Specifications

Fitment 2006-2010 Jeep Commander
Engine / Chassis PowerTech 3.7L V6 (EKG) / XK
Stock Output 210 hp / 235 lb-ft
Replaces OEM Part # 17939, 17939N, 56044734AA, 56044734AB

Compatibility

  • 2006-2010 Jeep Commander Base / Sport 3.7L V6

Frequently Asked Questions & Fitment Warnings

Does this fit the XK Commander?

Yes, this is a direct fit for the 2006-2010 Jeep Commander equipped with the PowerTech 3.7L V6; it does not fit 4.7L or 5.7L V8 models.

What precaution is required before installing this starter?

Always disconnect the negative battery terminal prior to installation to avoid direct ground shorting and damaging the vehicle electrical harness.

The Jeep Durability Standard

Built for the rigorous demands of backcountry exploration and heavy utility, this unit delivers uninterrupted cranking torque to keep your XK Commander operating reliably in severe environments.




Ajustement

Faire

Jeep

Cylindrée

  • 3.7L

Année

  • 2006
  • 2007
  • 2008
  • 2009
  • 2010

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Starter for Jeep Commander (2006-2010) 3.7L

$68.95