Performance Timing Chain Kit for Saturn Vue (2008-2010) 3.6L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Direct-Fit Performance Timing Chain Kit for 2008-2010 Saturn Vue (GMT179)
What it Does: This performance timing chain kit synchronizes the crankshaft and dual overhead camshafts on the 2008-2010 Saturn Vue (GMT179) equipped with the LY7 3.6L High Feature V6 engine.
The Stock Saturn Vue Timing Drive Failure
The LY7 3.6L High Feature V6 in the GMT179 Saturn Vue uses a multi-chain timing drive vulnerable to oil aeration, extended drain intervals, and hydraulic tensioner bleed-down. Over time, primary and secondary link pins wear and elongate, while OEM plastic guide faces groove and fracture under thermal cycling. This slack retards camshaft phasing relative to the crankshaft, triggering P0008, P0016, or P0017 cam-correlation faults and risking piston-to-valve contact if a chain jumps a tooth.
Common Symptoms of a Failing OEM Timing Chain Assembly
- Check Engine Light / DTCs: Camshaft-to-crankshaft correlation codes such as P0008, P0016, and P0017 triggered by chain stretch.
- Audible Cold-Start Rattle: Metallic slapping from the front timing cover caused by bled-down tensioners and worn guide rails.
- Drivability & Engine Risk: Rough idle, sluggish acceleration, and severe valvetrain damage if a loose chain skips sprocket teeth.
The Direct-Fit Multi-Chain Timing Kit Solution
This direct-fit timing chain kit restores factory synchronization on the LY7 3.6L V6 using high-tensile steel roller-link primary and secondary chains built to resist pitch elongation. Matched hardened steel crankshaft and idler sprockets pair with reinforced polymer guide rails and calibrated hydraulic tensioners to maintain consistent chain preload across cold starts and high-RPM operation. All components install directly into OEM front-cover mounting bosses, replacing worn factory hardware matching OEM references 12600461, 12609258, and TKGM10436L.
What's Included
- 1x Primary Timing Chain
- 2x Secondary Timing Chains
- 1x Crankshaft Sprocket
- 2x Idler Sprocket Assemblies
- 4x Timing Chain Guides and Tensioners
Technical Specifications
| Fitment | 2008-2010 Saturn Vue |
|---|---|
| Engine / Chassis | LY7 3.6L High Feature V6 / GMT179 (Theta) |
| Stock Engine Output | 257 hp / 248 lb-ft |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 12600461, 12609258, TKGM10436L |
Compatibility
- 2008-2010 Saturn Vue — 3.6L Gas Naturally Aspirated (Manual or Automatic Transmission)
Frequently Asked Questions & Fitment Warnings
Does this fit the GMT179 Vue?
Yes. This is a direct fit for the 2008-2010 Saturn Vue equipped with the LY7 3.6L engine (manual or automatic). Does not fit 2.4L or 2.8L models, and is not compatible with Chrysler 3.6L Pentastar engines.
Will this resolve P0008 or P0016 cam-correlation codes and cold-start rattle?
Yes. Replacing stretched chains, grooved guides, and weak tensioners together restores cam-to-crank alignment and eliminates cold-start slap, clearing P0008, P0016, and P0017 faults once oil passages are clean.
Is a water pump included, and how involved is installation?
No, a water pump is not included. This comprehensive front-engine service requires supporting the engine, removing the front timing cover, aligning factory timing marks, and torquing fasteners to vehicle specifications.
The Saturn Precision Standard
Engineered for exact cam-to-crank phasing and sustained oil-pressure stability, this complete timing drive kit restores quiet cold starts and dependable valvetrain control. Built to handle daily thermal cycling in the GMT179 Vue, it protects your LY7 3.6L V6 against timing slip and costly internal engine damage.
Ajustement
Ajustement
|
Faire |
Saturn |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$445.95