Passer au contenu du produit
1 sur 6

Performance Timing Chain Kit for GMC Acadia (2007-2015) 3.6L



Prix normal $445.95
Prix promotionnel $445.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Timing Chain Kit for 2007-2015 GMC Acadia (Lambda)

What it Does: This direct-fit timing chain kit synchronizes crankshaft and camshaft rotation on the 2007-2015 GMC Acadia Lambda equipped with the LY7 / LLT 3.6L V6 engine by replacing worn chains, sprockets, guides, and tensioners as a matched assembly.

The Stock GMC Acadia Timing Chain Failure

On the Lambda platform equipped with the LY7 / LLT 3.6L V6 High Feature engine, early factory timing chains are prone to premature pin wear and elongation under high thermal loads or extended oil intervals. As the primary and secondary chains stretch and hydraulic tensioners lose damping pressure, excessive slack batters the guide rails. This mechanical phase shift pushes camshaft-to-crankshaft synchronization past ECM limits, triggering P0008 or P0016–P0019 correlation faults and risking jumped timing.

Common Symptoms of a Failing OEM Timing Chain Assembly

  • Check Engine Light / Correlation DTCs: Illumination of P0008, P0009, P0016, P0017, P0018, or P0019 codes caused by stretched chains shifting camshaft phase out of factory specification.
  • Audible Cold-Start Rattle: Distinct metallic slapping or clattering from the front timing cover during startup before oil pressure stabilizes the worn tensioners and guides.
  • Drivability Loss & Valvetrain Risk: Rough idle, sluggish throttle response, or catastrophic piston-to-valve contact if a slack chain skips teeth on the crankshaft or idler sprockets.

The Direct-Fit Multi-Chain Timing Solution

This complete timing drive assembly restores factory valve timing across the dual-overhead-cam valvetrain using a matched primary chain, two secondary chains, hardened steel crankshaft and idler sprockets, and low-friction guides and tensioners. Engineered as a direct replacement for OE references 12600461, 12609258, and TKGM10436L, every component mounts directly to factory boss locations on the LY7 / LLT 3.6L V6 engine block. Replacing all chains, sprockets, guides, and tensioners simultaneously prevents mismatched pitch wear and restores stable hydraulic tension.

What's Included

  • 1 Primary Timing Chain
  • 2 Secondary Timing Chains
  • 1 Crankshaft Sprocket
  • 2 Idler Sprocket Assemblies
  • 4 Timing Chain Guides and Tensioners

Technical Specifications

Fitment 2007-2015 GMC Acadia
Engine / Chassis LY7 / LLT 3.6L V6 / Lambda
Stock Engine Output 275–288 hp / 251–270 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 12600461, 12609258, TKGM10436L

Compatibility

  • 2007-2015 GMC Acadia — 3.6L Gas Naturally Aspirated (Manual or Automatic Transmission)

Frequently Asked Questions & Fitment Warnings

Does this fit the Lambda Acadia?

Yes. This is a direct fit for the 2007-2015 GMC Acadia equipped with the LY7 / LLT 3.6L V6 engine (manual or automatic). It will not fit 2.4L or 2.8L engines, nor is it compatible with Chrysler 3.6L Pentastar applications.

Will this resolve P0008/P0016 correlation codes, and is a water pump included?

Yes for correlation codes; no water pump is included. Replacing stretched primary and secondary chains alongside worn tensioners and guides corrects cam-to-crank phase errors causing P0008 or P0016 faults, while this kit strictly supplies the timing chains, guides, tensioners, and sprockets.

What does installation require for this timing chain service?

This is a comprehensive front-engine service. Installation typically requires supporting the engine, removing the front cover, aligning all factory timing marks, installing the chains, guides, tensioners, and sprockets in factory sequence, and torquing every fastener to OEM specifications.

The GMC Heavy-Duty Standard

Built to handle the sustained thermal cycles and daily load demands of the Lambda crossover chassis, this complete timing drive kit restores quiet valvetrain operation and long-term mechanical reliability. Replacing the entire timing system at once eliminates weak links and keeps your LY7 / LLT 3.6L V6 running strictly to factory timing specifications.




Ajustement

Faire

GMC

Cylindrée

  • 3.6L

Année

  • 2007
  • 2008
  • 2009
  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Performance Timing Chain Kit for GMC Acadia (2007-2015) 3.6L

$445.95