Passer au contenu du produit
1 sur 6

Performance Timing Chain Kit for Cadillac STS (2007-2011) 3.6L



Prix normal $445.95
Prix promotionnel $445.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Timing Chain Kit for 2007-2011 Cadillac STS (Sigma)

What it Does: This complete timing chain kit restores camshaft-to-crankshaft synchronization on the 2007-2011 Cadillac STS (Sigma) equipped with the LY7 / LLT 3.6L High Feature V6.

The Stock Cadillac STS Timing Chain Failure

On the Sigma chassis powered by the LY7 / LLT 3.6L V6, extended oil intervals and thermal cycling accelerate wear across the primary and dual secondary timing chains. Debris or low oil pressure in tensioner passages allows chain slack, while heat-brittled nylon guides fracture under load. As the chains elongate, valve timing drifts out of phase, triggering cam-crank correlation codes including P0008, P0016, and P0017.

Common Symptoms of a Failing OEM Timing Chain Kit

  • Check Engine Light / DTCs: Faults like P0008, P0016, or P0018 trigger when stretched chains skew cam-crank alignment.
  • Cold-Start Rattle: Weak hydraulic tensioners and worn guides permit metallic chain slap during initial oil-pressure buildup.
  • Drivability & Valvetrain Risk: Retarded cam timing causes rough idle and risks jumped teeth, resulting in severe piston-to-valve damage.

The Direct-Fit High-Feature Timing Chain Solution

Replacing the primary chain, both secondary chains, guides, tensioners, and sprockets together eliminates cumulative lash across the front timing drive. Precision-machined crankshaft and idler sprocket teeth maintain positive link engagement, while durable tensioner assemblies stabilize hydraulic damping on cold starts. Engineered to OEM tolerances for 12600461, 12609258, and TKGM10436L, every component installs directly into factory front-cover locations without modification.

What's Included

  • 1 Primary Timing Chain
  • 2 Secondary Timing Chains
  • 1 Crankshaft Sprocket
  • 2 Idler Sprocket Assemblies
  • 4 Timing Chain Guides and Tensioners

Technical Specifications

Fitment 2007-2011 Cadillac STS
Engine / Chassis LY7 / LLT 3.6L High Feature V6 / Sigma
Stock Engine Output 255–302 hp / 252–272 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 12600461, 12609258, TKGM10436L

Compatibility

  • 2007-2011 Cadillac STS — 3.6L Gas Naturally Aspirated (Manual or Automatic)

Frequently Asked Questions & Fitment Warnings

Does this fit the Sigma STS?

Yes. This is a direct fit for the 2007-2011 Cadillac STS equipped with the LY7 / LLT 3.6L engine (manual or automatic). Does not fit 2.4L, 2.8L, or Chrysler 3.6L Pentastar engines.

Will this clear P0008/P0016 codes, and is a water pump included?

Clears correlation faults; water pump excluded. Installing fresh chains and guides restores cam-crank synchronization to resolve P0008 and P0016 after ECM reset; a water pump is not included.

What preparation is required for installation?

Front-engine disassembly is required. Support the engine, remove the front timing cover, align factory timing marks, and torque all fasteners to OEM specifications.

The Cadillac Precision Standard

Engineered for Sigma sedan longevity, this timing service kit restores quiet valvetrain operation and factory ECU timing accuracy. Expect consistent cold-start oil tensioning and CEL-free reliability.




Ajustement

Faire

Cadillac

Cylindrée

  • 3.6L

Année

  • 2007
  • 2008
  • 2009
  • 2010
  • 2011

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Performance Timing Chain Kit for Cadillac STS (2007-2011) 3.6L

$445.95