Passer au contenu du produit
1 sur 6

PCV Valve Cover Membrane Kit for Land Rover Range Rover (2010-2020) 3.0L 5.0L



Prix normal $37.95
Prix promotionnel $37.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit PCV Valve Cover Membrane Kit for 2010-2020 Land Rover Range Rover (L322 / L405)

What it Does: Restores crankcase vacuum regulation and oil-vapor separation on 2010-2020 Land Rover Range Rover L322 and L405 models with AJ126 3.0L and AJ133 5.0L engines.

The Stock Land Rover Range Rover PCV Diaphragm Failure

Factory positive crankcase ventilation diaphragms on the L322 and L405 endure constant under-hood heat soak and corrosive blow-by vapors. Over time, the rubber membrane hardens and tears along its flexing lip on AJ126 3.0L and AJ133 5.0L engines. Ruptured membranes allow unmetered air into the intake, triggering lean codes P0171 and P0174 plus excessive crankcase pressure.

Common Symptoms of a Failing OEM PCV Membrane

  • Lean DTCs: Triggered P0171 or P0174 codes from unmetered intake vacuum leaks.
  • Audible Whistle: High-pitched valve cover whistling or whooshing with rough idle.
  • Oil Carryover: Intake oil residue and excessive crankcase pressure stressing engine seals.

The Direct-Fit Elastomer PCV Solution

This service kit replaces the worn cap, spring, and diaphragm without requiring complete valve cover replacement. Built with an oil-resistant elastomer membrane and calibrated spring, it restores factory vacuum geometry inside the cover housing. The molded retaining cap locks into OEM locations for LR133579, C2D60163, and 102123488, stopping intake oil carryover and crankcase pressure spikes.

What's Included

  • 1 PCV Cap
  • 1 PCV Membrane
  • 1 Spring

Technical Specifications

Fitment 2010-2020 Land Rover Range Rover
Engine / Chassis AJ126 3.0L / AJ133 5.0L / L322, L405
Stock Engine Output 340–557 hp / 332–516 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # LR133579, C2D60163, 102123488

Compatibility

  • 3.0L Gas Supercharged — 2014-2019
  • 5.0L Gas Naturally Aspirated — 2010-2013
  • 5.0L Gas Supercharged — 2010-2020

Frequently Asked Questions & Fitment Warnings

Does this fit the L322 / L405 Range Rover?

Yes. Direct fit for 2010-2020 Land Rover Range Rover AJ126 3.0L and AJ133 5.0L engines. Excludes 2.0L and 4.2L engines; not a complete valve cover.

How many kits does a 5.0L V8 use, and does it fix P0171/P0174?

Four kits total, not two. Sealing torn diaphragms stops vacuum leaks causing P0171 and P0174; confirm 3.0L quantity before ordering.

What does installation involve?

Standard valve-cover service. Remove the old cap, membrane, and spring, clean the seating surface, and install the new parts in factory order.

The Land Rover Precision Standard

Calibrated crankcase ventilation keeps L322 and L405 ECU fuel trims accurate and protects intake valves from oil deposits for CEL-free operation.




Ajustement

Faire

Land Rover

Cylindrée

  • 3.0L
  • 5.0L

Année

  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016
  • 2017
  • 2018
  • 2019
  • 2020

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

PCV Valve Cover Membrane Kit for Land Rover Range Rover (2010-2020) 3.0L 5.0L

$37.95