Passer au contenu du produit
1 sur 6

PCV Valve Cover Membrane Kit for Land Rover LR4 (2010-2016) 3.0L 5.0L



Prix normal $37.95
Prix promotionnel $37.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit PCV Valve Cover Membrane Kit for 2010-2016 Land Rover LR4 (L319)

What it Does: This PCV Valve Cover Membrane Kit restores sealed crankcase vapor separation and vacuum regulation inside the valve cover of 2010-2016 Land Rover LR4 L319 vehicles equipped with the AJ126 3.0L or AJ133 5.0L engine.

The Stock Land Rover LR4 PCV Diaphragm Failure

On the L319 platform powered by the AJ126 3.0L Supercharged V6 and AJ133 5.0L V8, the factory PCV diaphragm endures continuous engine bay heat soak and oil vapor saturation. Over time, the elastomer membrane hardens, collapses, or tears against the internal return spring. This breach pulls unmetered intake vacuum into the crankcase, disrupting oil-vapor separation and triggering lean fuel-trim faults such as P0171/P0174 alongside unstable idle conditions.

Common Symptoms of a Failing OEM PCV Membrane

  • Check Engine Light & Lean DTCs: Unmetered air entering through a torn diaphragm triggers P0171/P0174 lean codes, P0507 high idle, or P0300 misfires.
  • Audible Whistling or Whooshing: High crankcase vacuum pulling air past a collapsed membrane creates a pronounced whistle from the valve cover that changes when removing the oil filler cap.
  • Oil Consumption & Idle Instability: Failed vapor separation allows oil residue into the intake tract and causes rough idling and excessive crankcase pressure.

The Direct-Fit Valve Cover Service Solution

This direct-fit PCV service kit replaces the worn valve cover diaphragm assembly—restoring factory crankcase ventilation matching OEM references LR133579, C2D60163, and 102123488 without replacing the complete valve cover. A precision-molded membrane, calibrated tension spring, and retention cap re-establish sealed vacuum control and clean vapor separation. Components seat directly into factory valve cover locations on both AJ126 and AJ133 engines.

What's Included

  • 1 PCV Cap
  • 1 PCV Membrane
  • 1 Spring

Technical Specifications

Fitment 2010-2016 Land Rover LR4
Engine / Chassis AJ126 3.0L SC V6 & AJ133 5.0L V8 / L319
Stock Engine Output 340 hp / 332 lb-ft (3.0L) | 375 hp / 375 lb-ft (5.0L)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # LR133579, C2D60163, 102123488

Compatibility

  • 2014-2016 Land Rover LR4 — 3.0L Gas Supercharged (AJ126)
  • 2010-2013 Land Rover LR4 — 5.0L Gas Naturally Aspirated (AJ133)

Frequently Asked Questions & Fitment Warnings

Does this fit the L319 LR4?

Yes. This is a direct fit for the 2010-2016 Land Rover LR4 equipped with the AJ126 3.0L Supercharged V6 or AJ133 5.0L V8 engine. Does not fit 2.0L or 4.2L engines, and is not a complete valve cover assembly.

How many kits does a 5.0L V8 require, and will this clear P0171/P0174 lean codes?

The 5.0L AJ133 V8 requires four individual kits (not two), while 3.0L AJ126 applications vary—verify engine quantity before ordering. Replacing torn membranes stops unmetered crankcase vacuum leaks, resolving related P0171/P0174 lean codes once cleared.

What is required for installation on the valve cover?

Each kit includes the cap, membrane, and spring for one PCV location. Technicians must remove the old cap, clean the valve cover seating surface thoroughly, and install the spring, membrane, and cap in factory orientation.

The Land Rover Precision Standard

Engineered to restore factory crankcase vacuum calibration on L319 platforms, this service kit maintains ECU fuel-trim accuracy and CEL-free operation without costly complete valve cover replacement. Direct-fit OEM interchange dimensions ensure reliable sealing under sustained thermal cycling.




Ajustement

Faire

Land Rover

Cylindrée

  • 3.0L
  • 5.0L

Année

  • 2010
  • 2011
  • 2012
  • 2013
  • 2014
  • 2015
  • 2016

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

PCV Valve Cover Membrane Kit for Land Rover LR4 (2010-2016) 3.0L 5.0L

$37.95