Passer au contenu du produit
1 sur 6

PCV Valve Cover Membrane Kit for BMW 7 Series (2016-2019) 3.0L



Prix normal $40.95
Prix promotionnel $40.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit PCV Valve Cover Membrane Kit for 2016-2019 BMW 7 Series (G11/G12)

What it Does: This PCV Valve Cover Membrane Kit restores sealed crankcase pressure regulation on the 2016-2019 BMW 7 Series (G11/G12) with the B58 3.0L engine without replacing the entire valve cover.

The Stock BMW 7 Series PCV Failure

On the G11/G12 7 Series equipped with the B58 3.0L engine, the factory PCV diaphragm inside the valve cover breather housing suffers from heat soak and oil vapor degradation. As the rubber hardens or tears, unmetered vacuum leaks and oil mist enter the intake tract. This causes rough idling, valve cover whistling, and fault codes like P0171 and P052E on assemblies 11127645173 and 11 12 1 025 447.

Common Symptoms of a Failing OEM PCV Membrane

  • Check Engine Light & DTCs: Unmetered crankcase vacuum leaks trigger lean mixture codes like P0171 and P052E.
  • Whistling Noise: Air drawn past a torn diaphragm produces a sharp whistle from the valve cover.
  • Oil Ingestion & Rough Idle: Excess crankcase pressure forces oil into the intake, destabilizing idle speed.

The Direct-Fit PCV Membrane Service Solution

Instead of replacing the complete valve cover, this four-piece kit services the internal breather assembly on G11/G12 B58 3.0L engines. Built to OEM specifications for 11127645173 and 11 12 1 025 447, it pairs a heat-resistant membrane with a calibrated spring, washer seal, and cap. Direct-fit factory geometry restores proper crankcase vacuum regulation, stops intake oil contamination, and seals the cover cleanly.

What's Included

  • 1 PCV Cap
  • 1 PCV Membrane
  • 1 Spring
  • 1 Washer Seal

Technical Specifications

Fitment 2016-2019 BMW 7 Series
Engine / Chassis B58 3.0L / G11/G12
Stock Engine Output 320 hp / 330 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 11127645173, 11 12 1 025 447

Compatibility

  • 2016-2019 BMW 7 Series — 3.0L Gas Turbocharged (B58)

Frequently Asked Questions & Fitment Warnings

Does this fit the G11/G12 7 Series?

Yes. This is a direct fit for the 2016-2019 BMW 7 Series equipped with the B58 3.0L engine. It does not fit 2.0L B48 engines (2.0L 530i or 2.0L 740i) and is not a complete valve cover.

Will this clear P0171/P052E codes and stop cover whistling?

Yes. Replacing the torn diaphragm, spring, and seal restores crankcase sealing on 11127645173 covers, resolving vacuum-related P0171 and P052E faults.

How many pieces are included, and what prep is required?

Four pieces are included: one cap, membrane, spring, and washer seal; clean the valve cover seating surface before installing in factory order.

The BMW Precision Standard

Proper crankcase ventilation on the G11/G12 chassis ensures accurate ECU fuel trims, clean intake ports, and CEL-free operation. Direct-fit internals restore factory sealing durability under high thermal loads.




Ajustement

Faire

BMW

Cylindrée

  • 3.0L

Année

  • 2016
  • 2017
  • 2018
  • 2019

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

PCV Valve Cover Membrane Kit for BMW 7 Series (2016-2019) 3.0L

$40.95