Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Volkswagen Beetle Passat (2012-2014) 2.5L



Prix normal $50.95
Prix promotionnel $50.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2012-2014 Volkswagen Beetle & Passat (5C / NMS)

What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-catalyst exhaust gas oxygen concentration on 2012-2014 Volkswagen Beetle (5C) and Passat (NMS) models equipped with the federal CBTA 2.5L engine to regulate closed-loop fuel trim and verify catalytic converter efficiency.

The Stock Volkswagen Beetle & Passat Oxygen Sensor Failure

On 5C Beetle and NMS Passat platforms running the CBTA 2.5L inline-5, factory zirconia sensing elements degrade from continuous exhaust heat soak, oil vapor contamination, and carbon fouling. Internal heater circuits also suffer thermal fatigue, causing open-circuit faults or slow sensor switching times. As the upstream lambda signal drifts or the downstream voltage lags, the Bosch Motronic ECM defaults to rich open-loop fueling, triggering P0135, P0141, or false P0420 catalyst efficiency codes.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / Heater & Response DTCs: Triggers codes such as P0130, P0135 (upstream heater circuit), P0141 (downstream heater circuit), or P2270 when sensor response slows or heater resistance goes out of spec.
  • Erratic Fuel Trim & Rich Running: A sluggish upstream sensor skews Short-Term and Long-Term Fuel Trims, causing rough idle, heavy exhaust soot, and reduced fuel economy.
  • Failed Emissions Inspection: Unverified post-catalyst oxygen storage or an active MIL prevents OBD-II readiness monitors from completing, resulting in immediate inspection failure.

The Direct-Fit Dual-Position Oxygen Sensor Solution

Replacing both sensors as a matched set restores factory lambda feedback and post-catalyst monitoring across the CBTA 2.5L exhaust system. Each sensor features a high-temperature stainless steel housing, laser-welded protective shield, and fast-light-off internal ceramic heater element engineered to resist thermal shock. Equipped with OE-style multi-wire harnesses and weatherproof connectors matching 234-5102 and 234-4754, both units thread directly into factory exhaust bungs with zero cutting or splicing.

What's Included

  • 1x Direct-Fit Upstream Oxygen Sensor (Replaces 234-5102)
  • 1x Direct-Fit Downstream Oxygen Sensor (Replaces 234-4754)

Technical Specifications

Fitment 2012-2014 Volkswagen Beetle, Passat
Engine / Chassis CBTA 2.5L Inline-5 / 5C, NMS
Emissions & Substrate EPA Federal (2-Sensor CBTA System) / Heated Zirconia Ceramic
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-5102, 234-4754

Compatibility

  • 2012-2014 Volkswagen Beetle 2.5L (CBTA Federal Emissions 2-Sensor Engine)
  • 2012-2014 Volkswagen Passat 2.5L (CBTA Federal Emissions 2-Sensor Engine)
  • Fitment Note: SULEV CBUA 2.5L engines use 3 oxygen sensors (upstream, mid-catalyst, and downstream) and require an additional mid-catalyst sensor not included in this 2-piece set.

Frequently Asked Questions & Fitment Warnings

Does this fit the 5C Beetle and NMS Passat 2.5L?

Yes. This is a direct fit for the 2012-2014 Volkswagen Beetle (5C) and Passat (NMS) equipped with the federal CBTA 2.5L engine using two oxygen sensors. SULEV CBUA 2.5L engines utilize a three-sensor layout and require an extra mid-catalyst sensor that is not included in this kit—confirm your engine code before ordering.

Will replacing both sensors clear P0135, P0141, or P0420 codes?

Yes, when the fault is caused by degraded sensing elements or open heater circuits. Installing matched upstream (234-5102) and downstream (234-4754) units resolves heater circuit codes like P0135 and P0141, though a persistent P0420 code after replacement indicates a mechanically spent catalytic converter.

Are the wiring connectors plug-and-play, and what installation prep is recommended?

Yes, both sensors feature factory-style connectors requiring zero wire splicing. Treat seized exhaust bungs with penetrating oil beforehand, use a dedicated O2 sensor socket to protect the harness, and keep anti-seize strictly on the threads rather than the sensor tip.

The Volkswagen Emissions Precision Standard

European engine management relies on accurate lambda feedback to balance stoichiometric combustion, fuel economy, and strict emissions readiness. Replacing both sensors as a matched pair restores crisp Motronic ECU fuel control and supports reliable, CEL-free operation on the CBTA 2.5L platform.




Ajustement

Faire

Volkswagen

Cylindrée

  • 2.5L

Année

  • 2012
  • 2013
  • 2014

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Volkswagen Beetle Passat (2012-2014) 2.5L

$50.95