O2 Oxygen Sensor Upstream Downstream for Toyota Highlander (2011-2013) 3.5L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2011-2013 Toyota Highlander (XU40)
What it Does: This 4-piece upstream Air-Fuel Ratio (A/F) and downstream oxygen sensor kit monitors pre- and post-catalyst exhaust oxygen levels on the 2011-2013 Toyota Highlander XU40 (2GR-FE 3.5L V6) to regulate fuel trim and verify catalyst efficiency.
The Stock Toyota Highlander Sensor Degradation
On high-mileage XU40 Highlanders powered by the 2GR-FE 3.5L V6, factory upstream Air-Fuel Ratio and downstream O2 sensors frequently suffer internal heater element burnout and ceramic substrate contamination. Repeated exhaust thermal cycling, moisture condensation, and carbon soot fouling degrade the platinum electrodes, causing sluggish response times. Once sensor output drifts out of range, the ECM cannot maintain accurate closed-loop fuel trim. This commonly triggers heater and signal DTCs including P0031, P0051, P0138, and P2195.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Triggers P0031, P0051, P0136, or P2195 from open heater circuits or sluggish sensor switching.
- Fuel Trim Imbalance & Rough Idle: Erratic upstream A/F feedback forces rich open-loop fueling, causing unstable idle and throttle hesitation.
- Poor Fuel Economy & Failed Emissions: Delayed voltage transitions reduce MPG and prevent OBD-II readiness monitors from setting.
The Direct-Fit Heated Zirconia Oxygen Sensor Solution
This matched 4-sensor kit replaces both Bank 1 and Bank 2 upstream A/F sensors and downstream O2 sensors simultaneously using direct-fit OEM geometry. Each unit features a double-laser-welded stainless steel housing that resists exhaust corrosion and thermal shock, protecting an internal zirconia ceramic sensing element and fast-acting planar heater. Factory-matched 4-wire harnesses and weather-sealed OEM-style connectors plug directly into the XU40 engine harness with zero splicing. Pre-applied anti-seize thread compound ensures clean, accurate installation into factory exhaust bungs.
What's Included
- 2x Upstream Oxygen Sensors
- 2x Downstream Oxygen Sensors
Technical Specifications
| Fitment | 2011-2013 Toyota Highlander |
|---|---|
| Engine / Chassis | 2GR-FE 3.5L V6 / XU40 |
| Emissions & Substrate | Direct-Fit Heated 4-Wire / Zirconia Ceramic Element |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 234-9154, 234-9155, 234-4416, 234-4928, 89467-06180, 89467-0E190, 89467-48270, 89467-48280, 89465-0E040, 89465-48220, 89465-0E150, 89465-48360 |
Compatibility
- 2011 Toyota Highlander 3.5L (XU40)
- 2012 Toyota Highlander 3.5L (XU40)
- 2013 Toyota Highlander 3.5L (XU40)
Frequently Asked Questions & Fitment Warnings
Does this fit the XU40 Highlander?
Yes. This is a direct fit for the 2011-2013 Toyota Highlander equipped with the 2GR-FE 3.5L V6 engine. Does not fit 2.7L 4-cylinder (1AR-FE) models; confirm engine configuration before ordering.
Will this clear P0031, P0138, or P0420 codes?
Yes, for sensor faults. New upstream and downstream sensors resolve heater and slow-response DTCs like P0031 and P0138, and eliminate false P0420/P0430 codes caused by worn rear sensors (provided the catalytic converters are intact).
Are OEM connectors and thread prep included for installation?
Yes. All four sensors feature factory-length harnesses matching 89467-06180 and 89465-0E040 connectors with pre-applied anti-seize; chase the bung threads and torque to ~30 ft-lbs with a 22mm O2 socket.
The Toyota Precision Standard
Replacing all four sensors as a matched set restores closed-loop fuel control and catalyst monitoring across both banks of your 2GR-FE 3.5L V6. Built for thermal durability, this kit keeps your XU40 Highlander running efficiently and CEL-free.
Ajustement
Ajustement
|
Faire |
Toyota |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$173.95