O2 Oxygen Sensor Upstream Downstream for Subaru Legacy Outback (2013-2014) 2.5L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2013-2014 Subaru Legacy & Outback (BM/BR)
What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-catalytic converter exhaust gas oxygen levels on the 2013-2014 Subaru Legacy and Outback BM/BR equipped with the FB25 2.5L H4 engine to regulate closed-loop fuel trim and verify catalyst efficiency.
The Stock Subaru Legacy & Outback Oxygen Sensor Failure
On the BM/BR chassis powered by the FB25 2.5L H4 Boxer engine, factory oxygen sensors endure severe thermal cycling, exhaust soot, and oil vapor contamination inside the lower manifold and mid-pipe assembly. Over time, internal zirconia sensing elements suffer thermal shock and silicon poisoning, while internal heater circuits degrade and open. This slows sensor voltage switching frequency and triggers P0133, P0031, or P0137 faults, forcing the ECM into open-loop fuel enrichment.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light & Sensor DTCs: Triggers fault codes such as P0133 (slow upstream response), P0031 (heater circuit low), P0137 (downstream low voltage), or false P0420 catalyst efficiency alerts.
- Rich Fuel Trim & Carbon Fouling: Sluggish upstream signal voltage causes the ECM to over-fuel, leading to blackened tailpipes, rough idle, and premature catalytic substrate saturation.
- Degraded Fuel Economy & Emissions Failure: Open-loop operation increases fuel consumption, induces hesitation under light throttle load, and causes automatic OBD-II emissions inspection failure.
The Direct-Fit Heated Zirconia Oxygen Sensor Solution
Replacing both sensors as a matched pair restores synchronized air-fuel ratio feedback and accurate post-catalyst monitoring for OEM reference 234-9136. Each sensor utilizes a fast-light-off internal heater element and a laser-welded stainless steel protective shield housing a high-purity zirconia ceramic core that resists thermal shock and moisture intrusion. Factory-length heat-sleeved leads and OEM-style weatherproof connectors plug directly into the FB25 engine harness without cutting, splicing, or modifying exhaust bungs.
What's Included
- 1x Upstream Oxygen (O2) Sensor
- 1x Downstream Oxygen (O2) Sensor
Technical Specifications
| Fitment | 2013-2014 Subaru Legacy & Outback |
|---|---|
| Engine / Chassis | FB25 2.5L H4 / BM/BR |
| Emissions & Substrate | EPA Federal & CARB Compatible / Heated Zirconia Ceramic |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Welding) |
| Replaces OEM Part # | 234-9136 |
Compatibility
- 2013-2014 Subaru Legacy 2.5L (BM Sedan)
- 2013-2014 Subaru Outback 2.5L (BR Wagon)
Frequently Asked Questions & Fitment Warnings
Does this fit the BM/BR Legacy & Outback?
Yes. This is a direct fit for the 2013-2014 Subaru Legacy and Outback equipped with the FB25 2.5L H4 engine. It does not fit 3.6L H6 (EZ36D) models or 2010-2012 2.5L (EJ253) applications.
Will replacing both sensors clear P0133, P0031, or P0420 codes?
Yes, when caused by degraded sensors. Installing fresh upstream and downstream units resolves P0133, P0031, and P0137 faults and eliminates false P0420 triggers caused by slow rear O2 switching, provided the catalytic substrate remains intact.
Are factory connectors included and what installation prep is required?
Yes, direct-fit OEM connectors are pre-installed. Apply a light coat of high-temp anti-seize strictly to the threads while keeping the sensing tip clean, torque to 22-30 ft-lbs, and reset ECM learned fuel trims after installation.
The Subaru Precision Standard
Engineered to maintain tight closed-loop air-fuel stoichiometry and CEL-free operation on daily-driven BM/BR boxers, this matched O2 sensor kit restores crisp throttle response and dependable emissions compliance. Always verify your 2.5L engine designation prior to ordering for exact connector indexing.
Ajustement
Ajustement
|
Faire |
Subaru |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$44.95