Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Subaru Crosstrek (2013-2014) 2.0L



Prix normal $55.95
Prix promotionnel $55.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2013-2014 Subaru Crosstrek (GP)

What it Does: This matched Upstream and Downstream O2 Oxygen Sensor Kit for the 2013-2014 Subaru Crosstrek (GP) equipped with the FB20 2.0L engine restores closed-loop air-fuel metering and catalytic efficiency monitoring.

The Stock Subaru Crosstrek Oxygen Sensor Failure

On the GP Crosstrek powered by the FB20 2.0L boxer engine, factory oxygen sensors endure severe exhaust thermal cycling and trace oil vapor contamination over high mileage. Carbon deposits and thermal shock degrade the internal zirconia element and burn out the integrated heating circuit, causing sluggish voltage response and skewed fuel trims. This wear triggers P0031, P0137, P0171, and P0420 fault codes while forcing open-loop fueling.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light & Heater DTCs: Triggers P0031, P0037, P0137, or P2096 from open heater circuits or delayed voltage switching.
  • Erratic Fuel Trims: Causes rough idle, hesitation under load, and rich or lean trim spikes from skewed upstream air-fuel feedback.
  • Emissions & Economy Loss: Increases tailpipe emissions, lowers MPG, and triggers false P0420 catalyst efficiency faults.

The Direct-Fit Planar Zirconia Oxygen Sensor Solution

This matched pair replaces both primary positions—the upstream wideband A/F sensor (234-9109 / 22641AA610) and downstream narrowband sensor (234-4513)—eliminating cross-bank signal drift. Built with laser-welded stainless steel bodies and fast-light-off planar zirconia elements, each sensor resists moisture ingress and exhaust fouling. Factory-length heat-resistant harnesses and OEM-spec connectors thread into existing exhaust bungs for direct plug-and-play electrical output.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2013-2014 Subaru Crosstrek
Engine / Chassis FB20 2.0L / GP
Stock Engine Output 148 hp / 145 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 0K7JP1, 234-9109, 234-4513, 22641-AA610, 22641AA610

Compatibility

  • 2013 Subaru Crosstrek 2.0L
  • 2014 Subaru Crosstrek 2.0L

Frequently Asked Questions & Fitment Warnings

Does this fit the GP Crosstrek?

Yes. This is a direct fit for the 2013-2014 Subaru Crosstrek equipped with the FB20 2.0L engine. Confirm your 2.0L engine configuration and OEM connector plug style prior to ordering.

Will replacing both sensors clear P0137, P0171, or P0420 codes?

Yes, when caused by worn sensors. Installing matched upstream (22641-AA610) and downstream (234-4513) sensors resolves heater and slow-response codes like P0031, P0137, and P2096, provided no exhaust leaks or failed catalytic converters exist.

Is any wiring or splicing required for installation?

No. Both sensors come with exact OEM harness lengths and factory-style weatherproof connectors for direct plug-and-play installation into stock exhaust bungs.

The Subaru Precision Standard

Engineered for FB20 boxer fueling accuracy, this matched sensor kit restores crisp throttle response and balanced stoichiometric control. Count on reliable closed-loop efficiency and CEL-free emissions operation across daily and high-mileage driving.




Ajustement

Faire

Subaru

Cylindrée

  • 2.0L

Année

  • 2013
  • 2014

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Subaru Crosstrek (2013-2014) 2.0L

$55.95