O2 Oxygen Sensor Upstream Downstream for Subaru Baja (2003-2006) 2.5L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2003-2006 Subaru Baja (BT)
What it Does: This 2-piece upstream and downstream oxygen sensor kit for the 2003-2006 Subaru Baja (BT) with the EJ25 2.5L engine measures pre- and post-catalytic converter exhaust oxygen to maintain accurate fuel trim and verify catalyst efficiency.
The Stock Subaru Baja Oxygen Sensor Failure
On the BT Subaru Baja powered by the EJ25 2.5L engine, factory oxygen sensors endure severe exhaust heat cycling and carbon fouling. Over time, the sensing element slows or suffers heater burnout, sending biased voltage to the ECM. Leaving an aged partner sensor installed creates mismatched pre-cat and post-cat readings. This skews closed-loop fueling and triggers diagnostic trouble codes like P0130, P0135, P0141, or P0420.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Stored codes such as P0135, P0141, or P0420 from heater circuit failure or slow sensor response.
- Drivability & Fuel Consumption: Rough idle, hesitation, and higher fuel use caused by inaccurate fuel trim feedback.
- Emissions Compliance Failure: Incomplete oxygen sensor and catalyst readiness monitors that prevent passing emissions testing.
The Direct-Fit Upstream & Downstream Oxygen Sensor Solution
Installing this matched 2-piece kit restores synchronized pre-cat and post-cat exhaust monitoring on your BT Baja. Each direct-fit sensor features the factory connector style, eliminating generic lead splicing for clean signal integrity. Built to interchange with OEM numbers AA2344706, AA234-4706, A-234-4132, A-2344132, and 10325229, both threaded bodies seat directly into stock exhaust bungs. Keep anti-seize off the sensing tip, hand-thread before torquing, and complete a drive cycle.
What's Included
- 1 Upstream Oxygen Sensor
- 1 Downstream Oxygen Sensor
Technical Specifications
| Fitment | 2003-2006 Subaru Baja |
|---|---|
| Engine / Chassis | EJ25 2.5L / BT |
| Emissions & Sensor Spec | Pre-Cat & Post-Cat Direct-Fit Heated O2 Sensors |
| Installation Type | Direct-Fit OEM Replacement (No Splicing or Cutting) |
| Replaces OEM Part # | AA2344706, A-234-4132, A-2344132, 10325229, AA234-4706 |
Compatibility
- 2003-2006 Subaru Baja 2.5L (Confirm engine displacement, model year, and connector style against your vehicle before ordering)
Frequently Asked Questions & Fitment Warnings
Does this fit the BT Baja?
Yes. This is a direct fit for the 2003-2006 Subaru Baja (BT) equipped with the EJ25 2.5L engine. Verify your exact model year, engine displacement, and connector style prior to ordering; do not assume coverage for other engines or years.
Will this clear P0135, P0141, or P0420 codes?
Yes, when faulty sensors are the root cause. Replacing both upstream and downstream units restores pre- and post-cat monitoring; clear stored diagnostic codes after installation and complete a drive cycle so readiness monitors can run.
Is wire splicing or special prep required for installation?
No splicing is required. Both direct-fit connectors match factory harnesses. Handle the sensor tip carefully, keep grease and anti-seize off the sensing element, hand-thread the body first, and tighten to specified torque.
The Subaru Precision Standard
Matched upstream and downstream oxygen sensors keep the EJ25 2.5L boxer engine running at stoichiometric precision with crisp throttle response and CEL-free operation. Servicing both positions together prevents skewed fuel trims and eliminates repeat emissions testing failures.
Ajustement
Ajustement
|
Faire |
Subaru |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$65.95