O2 Oxygen Sensor Upstream Downstream for Pontiac G5 (2009-2010) 2.2L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Direct-Fit Upstream & Downstream O2 Sensor Kit for 2009-2010 Pontiac G5 (GM Delta)
What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-catalytic exhaust gas oxygen levels on the 2009-2010 Pontiac G5 (GM Delta) LAP 2.2L Ecotec to regulate closed-loop fuel trim and catalyst efficiency.
The Stock Pontiac G5 O2 Sensor Failure
High exhaust gas temperatures and thermal cycling inside the GM Delta exhaust manifold and mid-pipe gradually degrade the factory zirconia sensing elements on the LAP 2.2L Ecotec. Carbon soot, oil vapor, and silicone contamination foul the porous platinum electrodes, causing sluggish voltage switching between 0.1V and 0.9V. Internal heater circuit fatigue frequently triggers P0135 or P0141 fault codes, forcing the ECM into open-loop fueling and hurting fuel economy.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / Heater DTCs: Illuminated MIL storing P0131, P0135, P0137, or P0141 due to slow response or open internal heater circuits.
- Erratic Fuel Trim & Rich Idle: Sluggish upstream switching causes the ECM to over-fuel, producing rough idle, hesitation, and strong raw fuel odor.
- Failed Emissions Inspection: Compromised downstream signal skews catalyst monitor readiness, preventing OBD-II drive cycle completion or triggering false P0420 warnings.
The Direct-Fit Heated Zirconia O2 Sensor Solution
Engineered as a matched pair replacing 234-4066 (upstream) and 234-4668 (downstream), these sensors restore rapid closed-loop air-fuel metering across the LAP 2.2L Ecotec powerband. Each unit utilizes a fast-light-off internal ceramic heater, corrosion-resistant stainless steel housing, and laser-welded protective shield to withstand thermal shock. Factory-style weatherproof connectors and exact harness lengths ensure true plug-and-play installation with zero splicing.
What's Included
- 1x Upstream Oxygen Sensor (Pre-Catalytic Converter)
- 1x Downstream Oxygen Sensor (Post-Catalytic Converter)
Technical Specifications
| Fitment | 2009-2010 Pontiac G5 |
|---|---|
| Engine / Chassis | LAP 2.2L Ecotec I4 / GM Delta |
| Sensor Architecture | Heated Zirconia Planar Element (4-Wire Direct-Fit) |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Splicing) |
| Replaces OEM Part # | 234-4066, 234-4668 |
Compatibility
- 2009 Pontiac G5 (2.2L L4)
- 2010 Pontiac G5 (2.2L L4)
Frequently Asked Questions & Fitment Warnings
Does this fit the GM Delta G5?
Yes. This kit is a direct fit for the 2009-2010 Pontiac G5 equipped with the LAP 2.2L Ecotec engine. Not compatible with 2.4L engines or 2007-2008 model years; confirm engine displacement before ordering.
Will replacing both sensors clear P0135 and P0141 codes?
Yes, provided wiring is intact. Installing fresh upstream (234-4066) and downstream (234-4668) sensors restores heater resistance and voltage switching after clearing stored DTCs with an OBD-II scanner.
Is special preparation required for installation?
Standard 22mm O2 socket recommended. Apply penetrating oil to seized exhaust bungs, verify connector pin alignment, and torque sensors to factory spec without getting anti-seize on the sensor tip.
The Pontiac Precision Standard
Built to restore factory ECM feedback accuracy, this matched O2 sensor pair keeps your GM Delta running clean, efficient, and emissions-compliant. Count on crisp throttle response, balanced fuel trims, and reliable CEL-free operation mile after mile.
Ajustement
Ajustement
|
Faire |
Pontiac |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$45.95