O2 Oxygen Sensor Upstream Downstream for Mitsubishi Lancer (2009-2010) 2.4L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2009-2010 Mitsubishi Lancer (CY5A)
What it Does: This matched upstream and downstream oxygen sensor kit monitors pre- and post-cat exhaust oxygen on the 2009-2010 Mitsubishi Lancer (CY5A) 4B12 2.4L to maintain accurate fuel trim and verify catalyst efficiency.
The Stock Mitsubishi Lancer Oxygen Sensor Failure
Factory oxygen sensors on the CY5A Lancer equipped with the 4B12 2.4L endure severe thermal cycling and exhaust soot directly downstream of the manifold. Thermal fatigue eventually fractures the internal ceramic sensing element or burns out the heater circuit, causing sluggish voltage switching. Once biased or heater-failed, the ECU loses accurate stoichiometric feedback and triggers codes such as P0135, P0141, or P0171.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light / DTCs: Stored heater or slow-response codes like P0135, P0141, or false catalyst efficiency code P0420.
- Rough Idle & Hesitation: Biased pre-cat voltage disrupts closed-loop fuel trim and throttle response.
- Failed Emissions & Fuel Burn: Incomplete OBD-II readiness monitors and higher fuel consumption from open-loop fueling.
The Direct-Fit Heated Zirconia Oxygen Sensor Solution
This two-piece kit replaces both pre-cat and post-cat sensors simultaneously to eliminate signal drift between a fresh unit and a worn partner sensor. Each sensor uses a fast-light-off internal heater, stainless steel housing, and OEM-style connector matching 234-4116 and 234-4114 for direct plug-and-play installation without splicing. Factory thread pitch and harness length ensure clean routing away from exhaust heat on the 4B12 2.4L.
What's Included
- 1 Upstream Oxygen Sensor
- 1 Downstream Oxygen Sensor
Technical Specifications
| Fitment | 2009-2010 Mitsubishi Lancer |
|---|---|
| Engine / Chassis | 4B12 2.4L / CY5A |
| Emissions & Substrate | EPA Federal (46-State Legal) / Heated Zirconia Ceramic Element |
| Installation Type | Direct Bolt-On OEM Replacement (Plug-and-Play, No Splicing) |
| Replaces OEM Part # | 234-4116, 234-4114 |
Compatibility
- 2009 Mitsubishi Lancer 2.4L (CY5A)
- 2010 Mitsubishi Lancer 2.4L (CY5A)
Frequently Asked Questions & Fitment Warnings
Does this fit the CY5A Lancer?
Yes. This is a direct fit for the 2009-2010 Mitsubishi Lancer equipped with the 4B12 2.4L engine. Excluded: 2.0L (4B11) naturally aspirated or turbocharged Evolution/Ralliart trims and other model years.
Will this clear O2 heater or P0420 codes?
Yes, when caused by failed sensors. Replacing both resolves P0135 and P0141 heater faults after clearing codes and completing a drive cycle; a damaged catalytic converter still triggers P0420.
Is wire splicing or special installation prep required?
No splicing is required. Connectors match 234-4116 and 234-4114; keep grease and anti-seize off the sensing tip, hand-thread each body, and torque to factory specification.
The Mitsubishi Precision Standard
Engineered for crisp throttle response and accurate closed-loop fueling on the CY5A platform, this matched sensor set restores factory combustion efficiency. Keep your 4B12 2.4L running CEL-free and emissions-compliant under daily driving and high-RPM load.
Ajustement
Ajustement
|
Faire |
Mitsubishi |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$53.95