Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Mitsubishi Lancer (2002-2003) 2.0L



Prix normal $53.95
Prix promotionnel $53.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2002-2003 Mitsubishi Lancer (CS6A)

What it Does: This matched upstream and downstream oxygen sensor kit monitors exhaust air-fuel ratios on the CS6A 2002-2003 Mitsubishi Lancer 4G94 2.0L to restore ECU fuel trim accuracy.

The Stock Mitsubishi Lancer Oxygen Sensor Failure

On the CS6A chassis with the 4G94 2.0L engine, factory oxygen sensors endure severe exhaust heat cycling and carbon contamination. Over time, thermal shock fractures the internal zirconia element while carbon deposits foul the platinum electrodes, causing sluggish voltage switching. Internal heater coil burnout also triggers P0135 or P0141 faults, preventing closed-loop fuel control and skewing P0420 catalyst efficiency checks.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0130, P0135, P0141, or P0420 codes from slow switching or open heater circuits.
  • Fuel Trim Drift: Erratic voltage forces rich open-loop fueling, causing soot buildup and fouled plugs.
  • Drivability & Emissions Loss: Warm-up hesitation, poor MPG, and failed tailpipe emissions testing.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

Built as direct-fit replacements for OEM numbers 234-4739 and 234-4642, these 4-wire heated sensors restore rapid closed-loop feedback on the 4G94 2.0L. Each unit utilizes a laser-welded stainless housing and porous PTFE filter to resist moisture shock inside the exhaust stream. Factory-calibrated zirconia elements and OEM-style harness plugs eliminate wire splicing, while pre-applied anti-seize eases engagement into factory M18x1.5 bungs.

What's Included

  • 1 Upstream Oxygen Sensor (234-4739)
  • 1 Downstream Oxygen Sensor (234-4642)

Technical Specifications

Fitment 2002-2003 Mitsubishi Lancer
Engine / Chassis 4G94 2.0L / CS6A
Emissions & Substrate EPA Federal Compliant / 4-Wire Heated Zirconia Ceramic
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4739, 234-4642

Compatibility

  • 2002-2003 Mitsubishi Lancer 2.0L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the CS6A Lancer?

Yes. Fits 2002-2003 Mitsubishi Lancer models with the 4G94 2.0L engine. Excludes Evolution VIII (4G63T); confirm engine before ordering.

Will this clear P0135, P0141, or P0420 codes?

Yes, if caused by sensor failure. Replacing 234-4739 and 234-4642 restores heater resistance and switching speed, unless the catalyst itself is damaged.

Is wire splicing or extra hardware needed?

No splicing required. Plug-and-play connectors install directly; clean the M18x1.5 bung threads first and torque to 30 lb-ft.

The Mitsubishi Precision Standard

Restoring accurate stoichiometric feedback keeps your CS6A running with crisp throttle response and clean emissions. Matched sensor replacement ensures balanced ECU control without drivability compromises.




Ajustement

Faire

Mitsubishi

Cylindrée

  • 2.0L

Année

  • 2002
  • 2003

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Mitsubishi Lancer (2002-2003) 2.0L

$53.95