Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Mazda Tribute (2009-2010) 2.5L



Prix normal $75.95
Prix promotionnel $75.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2009-2010 Mazda Tribute (CD2)

What it Does: This matched upstream and downstream oxygen sensor kit monitors exhaust oxygen content on the CD2 2009-2010 Mazda Tribute L5-VE 2.5L I4 to regulate closed-loop fuel trim and verify catalyst efficiency.

The Stock Mazda Tribute Oxygen Sensor Failure

Over extended mileage, the factory oxygen sensors on the CD2 Tribute equipped with the L5-VE 2.5L I4 suffer thermal fatigue, internal heater circuit burnout, and zirconia element contamination from oil ash or fuel additives. As the upstream wideband element degrades, response latency slows and biases closed-loop fueling calculations, while a sluggish downstream sensor misreports catalyst oxygen storage capacity. These mechanical failures trigger ECU fault codes including P0135, P0141, P0171, and P0420.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers heater codes P0135 or P0141 and response code P0420.
  • Erratic Fuel Trim: Sluggish feedback causes rich or lean skewing (P0171/P0172) and rough idle.
  • Emissions & MPG Loss: Open-loop fueling increases unburned hydrocarbons and reduces fuel economy.

The Direct-Fit Dual Oxygen Sensor Solution

Replacing both positions as a matched set restores factory closed-loop lambda feedback across the entire exhaust stream on the CD2 platform. Built with fast-light-off internal heaters, laser-welded stainless housings, and dual-layer porous PTFE protective shields, these direct-fit sensors resist moisture shock and thermal cycling. Both units feature pre-terminated OEM-style electrical connectors and factory-length harnesses to replace 234-5113 and 234-4609 without splicing, cutting, or harness tension.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2009-2010 Mazda Tribute
Engine / Chassis L5-VE 2.5L I4 / CD2
Emissions & Sensor Type Upstream Wideband AFR & Downstream Heated O2 / Zirconia Ceramic
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4609, 234-5113

Compatibility

  • 2009-2010 Mazda Tribute 2.5L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the CD2 Tribute?

Yes. This is a direct fit for the 2009-2010 Mazda Tribute equipped with the L5-VE 2.5L I4 engine. Excludes 3.0L V6 and Hybrid trims; confirm engine before ordering.

Will this clear P0135, P0141, or P0420 codes?

Yes, when sensor-related. Replacing 234-5113 and 234-4609 clears heater and response faults, though a damaged catalyst still triggers P0420.

Are OEM connectors included for installation?

Yes. Both sensors include direct-fit OEM connectors; keep anti-seize off the sensing tip during torque-down.

The Mazda Precision Standard

Engineered for exact ECU voltage calibration, this matched kit keeps your L5-VE 2.5L I4 running clean and CEL-free. Maintain emissions compliance and steady fuel economy without dealership markup.




Ajustement

Faire

Mazda

Cylindrée

  • 2.5L

Année

  • 2009
  • 2010

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Mazda Tribute (2009-2010) 2.5L

$75.95