O2 Oxygen Sensor Upstream Downstream for Mazda B-Series B4000 (2002-2010) 4.0L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Direct-Fit Upstream & Downstream Oxygen Sensor Kit for 2002-2010 Mazda B-Series B4000 (4th Gen)
What it Does: This matched 4-piece upstream and downstream oxygen sensor kit monitors pre- and post-catalyst exhaust air-fuel ratios on the 2002-2010 Mazda B-Series B4000 4.0L Cologne SOHC V6 to maintain closed-loop fuel trim precision and catalytic efficiency.
The Stock Mazda B-Series B4000 Oxygen Sensor Failure
On the 4th Gen B4000 equipped with the 4.0L Cologne SOHC V6, factory zirconia sensors endure constant thermal shock, exhaust soot fouling, and moisture condensation during cold starts. Over time, internal heater elements open-circuit and the porous platinum-coated ceramic thimble develops micro-fractures or silica contamination, slowing millivolt switching response. Lazy upstream sensors force the PCM into inaccurate fuel trims (P0171/P0174), while degraded downstream units trigger false catalyst efficiency faults (P0420/P0430) or heater circuit codes (P0135, P0155).
Common Symptoms of a Failing OEM Oxygen Sensor Kit
- Check Engine Light & Heater/Trim DTCs: Stored codes such as P0135, P0155 (heater circuit malfunction), P0171/P0174 (system too lean), or P0420/P0430 caused by sluggish voltage switching.
- Sluggish Throttle & Rough Idle: Delayed closed-loop fuel trim corrections cause rich-running hesitation under load, surging at highway cruise, and unstable cold-start idle.
- Increased Fuel Consumption & Emissions Failure: A biased sensor forces the PCM to inject excess fuel, fouling spark plugs, overheating catalytic converters, and failing OBD-II readiness monitors.
The Direct-Fit 4-Wire Heated Zirconia Sensor Solution
This matched 4-sensor set replaces both upstream air-fuel feedback sensors and both downstream catalyst monitors simultaneously to restore balanced bank-to-bank telemetry on your 4th Gen truck. Built with high-temperature stainless steel housings, dual-layer protective shields, and fast-light-off zirconia sensing elements, each unit resists thermal fatigue and exhaust condensation shock. Factory-style plug-and-play harnesses and pre-coated anti-seize threads ensure proper electrical resistance and leak-free installation matching OEM references 234-4045, 234-4046, 234-4071, 234-4127, 234-4609, and 234-4610.
What's Included
- 2 Upstream Oxygen Sensors
- 2 Downstream Oxygen Sensors
Technical Specifications
| Fitment | 2002-2010 Mazda B-Series B4000 |
|---|---|
| Engine / Chassis | 4.0L Cologne SOHC V6 / 4th Gen B-Series |
| Sensor Architecture | 4-Wire Heated Zirconia Ceramic Element (Upstream & Downstream) |
| Installation Type | Direct Bolt-On OEM Replacement (No Cutting or Splicing) |
| Replaces OEM Part # | 234-4045, 234-4046, 234-4071, 234-4127, 234-4609, 234-4610 |
Compatibility
- 2002-2010 Mazda B-Series B4000 (4.0L V6 — Upstream & Downstream Positions)
Frequently Asked Questions & Fitment Warnings
Does this fit the 4th Gen B-Series B4000?
Yes. This is a direct fit for the 2002-2010 Mazda B-Series B4000 equipped with the 4.0L Cologne SOHC V6 engine. Does not fit 2.3L I4 (B2300) or 3.0L V6 (B3000) models—confirm your 4.0L engine displacement prior to ordering.
Will replacing all four sensors clear P0135, P0155, or P0420/P0430 codes?
Yes, when the fault is caused by aged sensors. Installing fresh upstream and downstream units restores heater circuit integrity and rapid 0.1V–0.9V switching to clear P0135/P0155 heater codes; however, returning P0420/P0430 codes indicate a depleted catalytic converter substrate or an upstream exhaust leak.
Are the connectors plug-and-play, and what prep is required for installation?
Yes, all four sensors feature direct-fit OEM connectors with no splicing required. Apply penetrating oil to seized exhaust bungs beforehand, clean corroded threads with an M18 x 1.5 thread chaser, and torque each sensor to 30–35 lb-ft using a 22mm O2 sensor socket.
The Mazda Heavy-Duty Standard
Built to handle sustained towing heat and high-mileage exhaust cycling on the 4th Gen B4000, this matched sensor set keeps your 4.0L Cologne SOHC V6 operating in accurate closed-loop fuel control. Replacing all four banks together prevents asymmetrical fuel trims and supports reliable CEL-free operation.
Ajustement
Ajustement
|
Faire |
Mazda |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$83.95