Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Mazda 6 (2009-2010) 3.7L



Prix normal $154.95
Prix promotionnel $154.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2009-2010 Mazda 6 (GH)

What it Does: This four-sensor kit monitors upstream and downstream exhaust oxygen on the 2009-2010 Mazda 6 (GH) MZI 3.7L V6 to regulate fuel trims.

The Stock Mazda 6 Oxygen Sensor Failure

On the GH Mazda 6 equipped with the MZI 3.7L V6, factory oxygen sensors endure severe exhaust thermal cycling and carbon soot fouling over high mileage. The internal zirconia ceramic sensing element degrades from oil ash, silicone contamination, or moisture shock, causing sluggish voltage switching and skewed air-fuel feedback. Additionally, internal platinum heater circuits frequently burn out open-circuit, preventing the sensors from reaching closed-loop operating temperature and triggering persistent P0133, P0135, and P0155 fault codes.

Common Symptoms of Failing OEM Oxygen Sensors

  • Check Engine Light / DTCs: Triggers P0133, P0153 (slow response), P0135/P0155 (heater faults), or P0420/P0430.
  • Rich Running & Soot: Skewed upstream signals force default enrichment, fouling spark plugs and tailpipes.
  • Reduced Economy & Emissions Failure: Delayed closed-loop control lowers fuel mileage and fails OBD-II readiness.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

Replacing all four sensors simultaneously with this matched direct-fit kit restores accurate Bank 1 and Bank 2 feedback across both exhaust banks. Each sensor features a laser-welded stainless steel protective shell, an internal ceramic sensing element, and a fast-acting integrated heating element for rapid closed-loop stabilization. Pre-terminated OEM-style weather-tight connectors and factory-length harnesses eliminate splicing, ensuring clean electrical resistance and zero-leak thread engagement matching 9E5Z-9F472-B, CA0918861, and CA07188G1A.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2009-2010 Mazda 6
Engine / Chassis MZI 3.7L V6 / GH
Sensor Architecture Direct-Fit Upstream & Downstream Heated O2 Sensors
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 9E5Z-9F472-B, CA0918861, CA07188G1A

Compatibility

  • 2009-2010 Mazda 6 3.7L

Frequently Asked Questions & Fitment Warnings

Does this fit the GH 6?

Yes. Fits 2009-2010 Mazda 6 models with the MZI 3.7L V6. Excludes 2.5L 4-cylinder trims; confirm engine before ordering.

Will this clear P0135, P0155, or P0420 codes?

Yes, when sensors are at fault. Replacing worn units resolves heater faults (P0135, P0155) and lazy-sensor P0420/P0430 triggers if catalysts remain healthy.

Are factory connectors included for plug-and-play installation?

Yes. All four sensors feature OEM-style connectors for direct installation without splicing.

The Mazda Precision Standard

Calibrated for accurate ECU signal response, this four-sensor kit restores closed-loop fuel precision and emissions compliance on the GH 3.7L platform.




Ajustement

Faire

Mazda

Cylindrée

  • 3.7L

Année

  • 2009
  • 2010

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Mazda 6 (2009-2010) 3.7L

$154.95