Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Lincoln MKS (2009-2010) 3.7L



Prix normal $128.95
Prix promotionnel $128.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2009-2010 Lincoln MKS (D385)

What it Does: This 4-piece oxygen sensor kit measures exhaust oxygen levels on the 2009-2010 Lincoln MKS (D385) equipped with the Duratec 37 3.7L V6 to regulate air-fuel ratios and monitor catalytic efficiency.

The Stock Lincoln MKS Oxygen Sensor Failure

On the D385 chassis with the Duratec 37 3.7L V6, factory oxygen sensors endure extreme exhaust heat cycles, condensation, and carbon contamination. Over mileage, the zirconia sensing element suffers thermal fatigue while internal heater coils burn out, slowing voltage switching rates. This delayed feedback skews PCM fuel trim calculations and triggers P0135, P0155, or P0171/P0174 fault codes. Sluggish sensors also cause rich operation and catalyst fouling.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers heater or slow-response codes like P0135, P0141, P0155, or P0420.
  • Poor Fuel Economy & Rough Idle: Skewed fuel trims force rich operation and sluggish throttle response.
  • Failed Emissions Test: Unregulated exhaust mixtures raise hydrocarbons and block OBD-II readiness monitors.

The Direct-Fit Stainless Oxygen Sensor Solution

Replacing all four units simultaneously with this matched 234-5097 and 234-4610 kit restores balanced bank-to-bank monitoring across upstream and downstream positions. Each sensor uses a fast-heating zirconia ceramic element inside a laser-welded stainless steel body to resist exhaust corrosion and thermal shock. Factory-length insulated harnesses and OE-style connectors maintain signal integrity for direct plug-in installation on the D385 exhaust without splicing.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2009-2010 Lincoln MKS
Engine / Chassis Duratec 37 3.7L V6 / D385
Sensor Architecture Upstream & Downstream Heated Zirconia
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-5097, 234-4610

Compatibility

  • 2009 Lincoln MKS 3.7L
  • 2010 Lincoln MKS 3.7L

Frequently Asked Questions & Fitment Warnings

Does this fit the D385 MKS?

Yes. This is a direct fit for the 2009-2010 Lincoln MKS equipped with the Duratec 37 3.7L V6 engine. Excludes 2010 models equipped with the 3.5L EcoBoost V6 engine.

Will this clear P0135 or P0420 codes?

Yes, when sensor-related. Replacing 234-5097 and 234-4610 resolves P0135 and P0155 heater faults; persistent P0420/P0430 codes require catalytic converter inspection.

Is wire splicing required for installation?

No. All four sensors use OE connectors for plug-and-play installation; torque to factory specification without contaminating the sensor tip.

The Lincoln Precision Standard

Engineered for closed-loop fuel accuracy and strict OBD-II emissions compliance on the D385 platform. Matched sensor response keeps the Duratec 37 3.7L V6 running smoothly without Check Engine Lights.




Ajustement

Faire

Lincoln

Cylindrée

  • 3.7L

Année

  • 2009
  • 2010

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Lincoln MKS (2009-2010) 3.7L

$128.95