Passer au contenu du produit
1 sur 3

O2 Oxygen Sensor Upstream Downstream for Kia Sedona (2015-2018) 3.3L



Prix normal $163.95
Prix promotionnel $163.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2015-2018 Kia Sedona (YP)

What it Does: This 4-piece oxygen sensor kit monitors pre- and post-catalytic converter exhaust oxygen levels on the 2015-2018 Kia Sedona (YP) G6DH 3.3L V6 to regulate air-fuel trim and verify catalyst efficiency.

The Stock Kia Sedona O2 Sensor Thermal & Fouling Failure

On the YP chassis equipped with the G6DH 3.3L Lambda II GDI V6, factory upstream and downstream oxygen sensors endure severe thermal cycling and direct-injection soot accumulation. Over time, oil vapor, silicone contamination, and heat soak fracture the internal ceramic zirconia element or burn out the heater circuit. Delayed switching voltage forces open-loop fueling and triggers codes like P0135, P0155, P0130, or false P0420/P0430 catalyst faults.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers P0135, P0155, P0133, or P0141 when internal heater resistance spikes or voltage switching lags.
  • Erratic Closed-Loop Fueling: Sluggish sensor feedback causes rough idle, cold-start hesitation, and uneven throttle response.
  • Poor Fuel Economy & Failed Emissions: Skewed fuel trims over-enrich combustion, risking catalyst overheating and emissions inspection failure.

The Direct-Fit Planar Zirconia O2 Sensor Solution

Replacing all four sensors as a matched set restores balanced Bank 1 and Bank 2 air-fuel feedback across the G6DH 3.3L exhaust manifolds and downstream catalyst pipes. Each sensor uses a fast-light-off planar zirconia element inside a corrosion-resistant stainless housing with protective shields against moisture and carbon fouling. Factory Weather-Pack connectors and OEM-length harnesses replace 39210-3CBC0, 39210-3CCB0, 39210-3CAA0, and 39210-3CDD0 with zero wire splicing.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2015-2018 Kia Sedona
Engine / Chassis G6DH 3.3L Lambda II GDI V6 / YP
Emissions & Sensing Matched Upstream & Downstream Heated Zirconia Sensors
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 39210-3CBC0, 39210-3CCB0, 39210-3CAA0, 39210-3CDD0

Compatibility

  • 2015 Kia Sedona 3.3L
  • 2016 Kia Sedona 3.3L
  • 2017 Kia Sedona 3.3L
  • 2018 Kia Sedona 3.3L

Frequently Asked Questions & Fitment Warnings

Does this fit the YP Sedona?

Yes. This is a direct fit for the 2015-2018 Kia Sedona equipped with the G6DH 3.3L engine. Does not fit 2006-2014 VQ chassis models or non-3.3L engines; confirm engine displacement before ordering.

Will this clear P0135, P0155, or P0420/P0430 codes?

Yes, when caused by worn sensors. Installing fresh upstream and downstream units restores Bank 1 and Bank 2 voltage switching, clearing heater circuit codes (P0135/P0155) and false P0420/P0430 alerts after an ECM drive cycle.

Is wire splicing or special prep required for installation?

No splicing is needed. All four sensors feature OEM plug-and-play connectors; lightly coat threads with sensor-safe anti-seize (avoiding the sensing tip) and torque to spec.

The Kia Precision Standard

Built to match OEM ECM voltage tolerances, this 4-sensor kit maintains exact stoichiometric fuel control and emissions compliance on your YP Sedona. Count on rapid cold-start heater activation and consistent fuel economy across daily driving and highway miles.




Ajustement

Faire

Kia

Cylindrée

  • 3.3L

Année

  • 2015
  • 2016
  • 2017
  • 2018

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Kia Sedona (2015-2018) 3.3L

$163.95