Passer au contenu du produit
1 sur 4

O2 Oxygen Sensor Upstream Downstream for Kia Optima (2009-2010) 2.4L



Prix normal $83.95
Prix promotionnel $83.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2009-2010 Kia Optima (MG)

What it Does: This upstream and downstream oxygen sensor kit monitors exhaust oxygen on the 2009-2010 MG Kia Optima 2.4L, sending real-time air-fuel and catalyst efficiency signals to the ECM.

The Stock Kia Optima Sensor Failure

Factory oxygen sensors on the MG Kia Optima endure severe exhaust thermal cycling and carbon fouling inside the G4KE 2.4L Theta II exhaust stream. Over time, the zirconia sensing element slows down while the internal heater circuit suffers resistance drift or open-circuit burnout. Degraded voltage switching skews closed-loop fuel trim calculations in the ECM, triggering P0135, P0141, and P0130 codes while forcing rich fuel delivery.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / Heater DTCs: Codes like P0135 or P0141 trigger when internal heater resistance exceeds specification.
  • Erratic Fuel Trims & Rough Idle: Slow voltage switching causes stumbling throttle response and unstable idle.
  • Poor Fuel Economy & Emissions Failure: Biased readings force rich enrichment, raising hydrocarbons and failing inspections.

The Direct-Fit Zirconia Oxygen Sensor Solution

This matched upstream and downstream oxygen sensor kit restores factory closed-loop fuel metering and catalyst monitoring on the MG chassis. Each unit uses a fast-acting planar zirconia element inside a laser-welded stainless steel shield to resist thermal shock and moisture intrusion. Factory-pinned 392102G400-compatible connectors and pre-coated threads eliminate splicing, ensuring clean millivolt feedback and stable heater current draw directly out of the box.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2009-2010 Kia Optima
Engine / Chassis G4KE 2.4L Theta II / MG
Stock Engine Output 175 hp / 169 lb-ft
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 392102G400

Compatibility

  • 2009 Kia Optima 2.4L
  • 2010 Kia Optima 2.4L

Frequently Asked Questions & Fitment Warnings

Does this fit the MG Optima?

Yes. This is a direct fit for the 2009-2010 Kia Optima equipped with the G4KE 2.4L Theta II engine. Excludes 2.7L V6 models; confirm 2.4L displacement before ordering.

Will this kit resolve P0135 and P0141 codes?

Yes. Replacing both sensors clears heater and slow-response faults like P0135 and P0141 when wiring and catalyst substrates are intact.

Is wiring modification required during installation?

No. Both sensors include factory-terminated OEM plugs matching 392102G400 specs for direct installation.

The Kia Precision Standard

Engineered for accurate fuel control and CEL-free operation, this matched pair restores factory emissions compliance and fuel economy. Built for reliable ECM signal stability under sustained exhaust heat.




Ajustement

Faire

Kia

Cylindrée

  • 2.4L

Année

  • 2009
  • 2010

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Kia Optima (2009-2010) 2.4L

$83.95