Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Infiniti QX60 (2015-2019) 3.5L



Prix normal $80.95
Prix promotionnel $80.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream and Downstream Oxygen Sensor Kit for 2015-2019 Infiniti QX60 (L50)

What it Does: This 4-piece oxygen sensor kit monitors exhaust oxygen levels on the L50 Infiniti QX60 3.5L V6 for accurate closed-loop fuel trims.

The Stock Infiniti QX60 Oxygen Sensor Failure

Factory oxygen sensors on the L50 platform endure extreme exhaust heat and thermal cycling downstream of the VQ35DE / VQ35DD 3.5L V6 cylinder banks. Over time, carbon fouling, silicone contamination, and heater circuit degradation cause sluggish millivolt switching or open-circuit faults. As sensing elements lose response speed, the ECM cannot maintain stoichiometric air-fuel ratios, causing fuel trim drift and Check Engine Lights.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Triggers codes including P0130/P0150, P0138/P0158, or P0171/P0174 lean fuel trim faults.
  • Rough Idle & Hesitation: Delayed voltage feedback causes rich/lean hunting at idle and sluggish throttle response.
  • Emissions & MPG Loss: Uncorrected enrichment increases emissions and triggers false P0420/P0430 catalyst codes.

The Direct-Fit 4-Piece Oxygen Sensor Solution

Built to match OEM reference 234-4985 specifications, this four-sensor kit restores balanced Bank 1 and Bank 2 feedback simultaneously. Each sensor uses a laser-welded stainless housing, protective shield, and fast-acting internal heater to resist thermal shock and moisture ingress. Factory-length shielded harnesses and keyed weatherproof connectors eliminate wire splicing, maintaining proper signal impedance for direct plug-and-play installation.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2015-2019 Infiniti QX60
Engine / Chassis VQ35DE / VQ35DD 3.5L V6 / L50
Emissions & Sensor Spec Direct-Fit Upstream & Downstream Heated O2 (4-Piece Set)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 234-4985

Compatibility

  • 2015-2019 Infiniti QX60 3.5L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the L50 QX60?

Yes. Direct fit for the 2015-2019 Infiniti QX60 with the VQ35DE / VQ35DD 3.5L V6. Excludes 2.5L Hybrid trims; confirm engine before ordering.

Will this clear P0130, P0138, or P0420/P0430 codes?

Yes, when caused by worn sensors. Replacing all four restores accurate Bank 1/Bank 2 switching, resolving P0130, P0138, and sensor-triggered P0420/P0430 codes after resetting.

Do these sensors require wire splicing for installation?

No. Each sensor includes OEM-style keyed connectors for direct installation; apply anti-seize only to the threads, keeping the tip clean.

The Infiniti Precision Standard

Replacing upstream and downstream sensors together ensures balanced bank-to-bank ECU calibration and emissions compliance. Restore precise fuel control and CEL-free operation on your L50 QX60.




Ajustement

Faire

Infiniti

Cylindrée

  • 3.5L

Année

  • 2015
  • 2016
  • 2017
  • 2018
  • 2019

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Infiniti QX60 (2015-2019) 3.5L

$80.95