Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Infiniti QX56 (2011-2013) 5.6L



Prix normal $81.95
Prix promotionnel $81.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2011-2013 Infiniti QX56 (Z62)

What it Does: This 4-piece direct-fit O2 sensor kit replaces both upstream and downstream sensors on the 2011-2013 Infiniti QX56 (Z62) VK56VD 5.6L V8 to restore accurate closed-loop fuel control.

The Stock Infiniti QX56 Sensor Degradation Issue

On the Z62 platform with the direct-injected VK56VD 5.6L V8, factory oxygen sensors endure severe exhaust heat and thermal cycling near the catalytic manifolds. Over time, carbon fouling, silicone contamination, and internal heater fatigue slow the zirconia element's switching voltage. When sensor response lags, the ECM loses accurate closed-loop feedback, triggering erratic fuel trim drift and P0131, P0137, or P0420/P0430 catalyst efficiency faults.

Common Symptoms of Failing OEM Oxygen Sensors

  • Check Engine Light: Triggers P0131, P0151, P0137, or P0420/P0430 from slow response or heater faults.
  • Poor Fuel Economy: Skewed fuel trims force rich-bias compensation across the VK56VD banks.
  • Rough Idle & Emissions Failure: Delayed closed-loop control causes unstable idle and failed readiness tests.

The Direct-Fit Matched O2 Sensor Solution

Replacing all four sensors as a matched set referencing OEM 234-4381 eliminates bank-to-bank fuel trim imbalance across both cylinder heads. Each unit features a fast-light-off internal heater and laser-welded stainless steel body to resist moisture and thermal shock. Calibrated zirconia sensing elements restore rapid voltage transitions for accurate ECM feedback. Factory-length shielded harnesses install directly into the Z62 exhaust bungs without splicing.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2011-2013 Infiniti QX56
Engine / Chassis VK56VD 5.6L V8 / Z62
Sensor Configuration Direct-Fit Heated O2 Kit (2 Upstream / 2 Downstream)
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4381

Compatibility

  • 2011-2013 Infiniti QX56 (5.6L)

Frequently Asked Questions & Fitment Warnings

Does this fit the Z62 QX56?

Yes. Fits 2011-2013 Infiniti QX56 (Z62) with the VK56VD 5.6L engine. Confirm 5.6L engine before ordering; excludes 2004-2010 JA60 models.

Will this clear P0131 or P0420/P0430 codes?

Yes, for sensor faults. New sensors fix slow-response and heater codes (P0131–P0157); persistent P0420/P0430 codes indicate worn catalytic converters.

Is wiring modification required for installation?

No. Direct-fit OEM connectors plug straight into factory harnesses with zero splicing.

The Infiniti Precision Standard

Accurate exhaust feedback protects the towing durability and emissions compliance of your Z62. Matched sensor response keeps your VK56VD 5.6L V8 running clean under load.




Ajustement

Faire

Infiniti

Cylindrée

  • 5.6L

Année

  • 2011
  • 2012
  • 2013

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Infiniti QX56 (2011-2013) 5.6L

$81.95