Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Infiniti QX50 (2015-2017) 3.7L



Prix normal $142.95
Prix promotionnel $142.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2015-2017 Infiniti QX50 (J50)

What it Does: This four-piece O2 sensor kit monitors pre- and post-catalyst exhaust oxygen on the 2015-2017 Infiniti QX50 (J50) 3.7L V6 to maintain closed-loop air-fuel ratios.

The Stock Infiniti QX50 O2 Sensor Failure

On the J50 chassis powered by the VQ37VHR 3.7L V6, factory oxygen sensors endure severe thermal cycling and soot buildup inside the dual-bank exhaust system. Over time, zirconia sensing elements suffer thermal cracking, carbon fouling, and internal heater burnout. Once sensor response lags or heaters fail, the ECM loses closed-loop fueling control and erratic fuel trims develop, triggering codes like P0130, P0150, P0031, and P0051.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Faults like P0031, P0051, P0137, P0157, or P0420/P0430 from slow sensor switching.
  • Drivability & Rough Idle: Throttle hesitation and erratic fuel trims as the ECM defaults to open-loop fueling.
  • Poor MPG & Emissions Failure: Skewed voltage causes over-fueling, fouled plugs, and failed OBD-II readiness monitors.

The Direct-Fit O2 Sensor Kit Solution

This matched four-sensor kit restores closed-loop fueling precision across Bank 1 and Bank 2 of the VQ37VHR 3.7L V6. Each direct-fit sensor features a laser-welded stainless steel housing, high-temp ceramic zirconia core, and calibrated internal heater for rapid light-off and stable millivolt switching. Factory-style connectors and exact-length harnesses bolt directly into existing exhaust bungs, replacing OE numbers 234-9148 and 24167.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2015-2017 Infiniti QX50
Engine / Chassis VQ37VHR 3.7L V6 / J50
Emissions & Sensor Type Direct-Fit Zirconia Ceramic / Upstream & Downstream 4-Sensor Kit
Installation Type Direct Bolt-On OEM Replacement
Replaces OEM Part # 234-9148, 24167

Compatibility

  • 2015-2017 Infiniti QX50 (3.7L)

Frequently Asked Questions & Fitment Warnings

Does this fit the J50 QX50?

Yes. This is a direct fit for the 2015-2017 Infiniti QX50 equipped with the VQ37VHR 3.7L V6 engine. Verify 3.7L engine fitment and OE numbers 234-9148 and 24167 before ordering.

Will this clear P0130/P0150 and P0420/P0430 codes?

Yes, when caused by worn sensors. Replacing all four units restores Bank 1 and Bank 2 signals for P0130/P0150 faults, though persistent P0420/P0430 codes indicate a depleted catalyst.

Are wiring modifications or cutting required for installation?

No. Each sensor uses plug-and-play OEM connectors and factory-length harnesses; thread into clean exhaust bungs and torque to spec.

The Infiniti Precision Standard

Built for the VQ37VHR platform, this matched sensor set restores factory air-fuel metering, throttle response, and CEL-free operation on your J50.




Ajustement

Faire

Infiniti

Cylindrée

  • 3.7L

Année

  • 2015
  • 2016
  • 2017

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Infiniti QX50 (2015-2017) 3.7L

$142.95