Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Infiniti G37 (2009-2010) 3.7L



Prix normal $72.95
Prix promotionnel $72.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit O2 Sensor Kit for 2009-2010 Infiniti G37 (V36)

What it Does: This 4-piece upstream and downstream oxygen sensor kit monitors exhaust gas oxygen on the 2009-2010 Infiniti G37 V36 (VQ37VHR 3.7L) to regulate fuel trim and catalyst monitoring.

The Stock Infiniti G37 Sensor Failure

Extreme exhaust heat and thermal cycling on the V36 chassis gradually degrade the OEM zirconia sensing elements inside the VQ37VHR 3.7L V6 exhaust system. Carbon fouling and internal heater circuit fatigue cause sluggish voltage switching and inaccurate air-fuel ratio data to the ECM. Delayed sensor response forces open-loop fueling and triggers fault codes such as P0130, P0150, or P0420/P0430.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light: Triggers P0130, P0150, or heater codes from slow switching.
  • Fuel Trim Drift: Sluggish upstream voltage causes rough idle and throttle hesitation.
  • Emissions Failure: Unmetered fueling drops MPG and blocks readiness monitors.

The Direct-Fit 4-Sensor Solution

Replacing all four sensors as a matched set restores balanced Bank 1 and Bank 2 closed-loop fueling across the VQ37VHR 3.7L exhaust. Each direct-fit sensor uses OEM-style weatherproof connectors, stainless steel housings, and laser-welded sensing tips engineered against exhaust heat soak. Pre-configured harness lengths and factory threads match 234-4380 specifications, eliminating splicing while delivering fast light-off and accurate ECM signal output.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2009-2010 Infiniti G37
Engine / Chassis VQ37VHR 3.7L V6 / V36
Sensor Specification Upstream & Downstream 4-Sensor Kit
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 234-4380

Compatibility

  • 2009-2010 Infiniti G37 3.7L

Frequently Asked Questions & Fitment Warnings

Does this fit the V36 G37?

Yes. Fits 2009-2010 Infiniti G37 models with the VQ37VHR 3.7L engine. Confirm your 3.7L engine before ordering; 3.5L models are excluded.

Will this clear P0130, P0150, or P0420/P0430 codes?

Yes, if sensor-related. New sensors clear P0130/P0150 switching faults, though persistent P0420/P0430 codes require checking catalytic converter health.

Is wiring modification needed for installation?

No. Direct-fit plugs install without cutting or splicing; inspect exhaust bungs and torque sensors to factory specification.

The Infiniti Performance Standard

Accurate Bank 1 and Bank 2 feedback keeps the high-revving VQ37VHR sharp across the RPM band. This matched 4-sensor kit restores throttle response, clean emissions, and closed-loop efficiency.




Ajustement

Faire

Infiniti

Cylindrée

  • 3.7L

Année

  • 2009
  • 2010

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Infiniti G37 (2009-2010) 3.7L

$72.95