Passer au contenu du produit
1 sur 2

O2 Oxygen Sensor Upstream Downstream for Hyundai Elantra (2010-2012) 2.0L



Prix normal $34.95
Prix promotionnel $34.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2010-2012 Hyundai Elantra (HD / FD)

What it Does: This 2-piece oxygen sensor kit measures pre- and post-catalyst exhaust oxygen on the 2010-2012 Hyundai Elantra HD / FD G4GC 2.0L for accurate fuel trim and emissions monitoring.

The Stock Hyundai Elantra Oxygen Sensor Failure

Factory zirconia sensing elements and internal ceramic heaters on the HD / FD equipped with the G4GC 2.0L endure continuous thermal cycling and exhaust soot contamination. Over time, thermal shock fractures the element or burns out the heater circuit, causing sluggish voltage switching between 0.1V and 0.9V. This triggers slow-response and heater faults like P0133, P0135, and P0141, while biased readings set P0420.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Stores codes including P0130, P0133, P0135, P0141, or P0420 from open heater circuits or slow oscillation.
  • Rough Idle & Hesitation: Biased pre-cat feedback forces inaccurate ECM short-term fuel trim corrections under load.
  • Higher Fuel Consumption & Failed Emissions: Rich fuel compensation lowers mileage and prevents OBD-II readiness monitors from setting.

The Direct-Fit Dual-Sensor Oxygen Sensor Solution

Replacing both sensors together restores synchronized pre-cat and post-cat voltage feedback without pairing a new unit with an aged partner sensor. Each direct-fit sensor features factory-matched connectors and exact harness lengths for plug-and-play installation without cutting or splicing leads. Stainless housings and responsive sensing elements maintain closed-loop stoichiometric control and accurate catalytic converter efficiency monitoring across the G4GC 2.0L exhaust tract.

What's Included

  • 1x Upstream Oxygen Sensor (Pre-Catalytic Converter)
  • 1x Downstream Oxygen Sensor (Post-Catalytic Converter)

Technical Specifications

Fitment 2010-2012 Hyundai Elantra
Engine / Chassis G4GC 2.0L / HD / FD
Sensor Configuration Upstream (Pre-Cat) & Downstream (Post-Cat) Direct-Fit
Installation Type Direct Bolt-On OEM Replacement (Factory Connectors, No Splicing)

Compatibility

  • 2010-2012 Hyundai Elantra (2.0L Engine Only)

Frequently Asked Questions & Fitment Warnings

Does this fit the HD / FD Elantra?

Yes. This is a direct fit for the 2010-2012 Hyundai Elantra equipped with the G4GC 2.0L engine. Confirm engine displacement and connector style before ordering; excluded from 1.8L or other engine variants.

Will this clear P0133, P0135, or P0420 codes?

Yes, when faulty sensors are the cause. Replacing failed sensors resolves P0133, P0135, and P0141 circuits and restores downstream catalyst monitoring, though a degraded converter will still set P0420. Clear codes and complete a drive cycle afterward.

Is wire splicing or anti-seize required during installation?

No splicing is required. Thread sensors in by hand before torquing to specification, and keep grease and anti-seize strictly off the sensing tips.

The Hyundai Precision Standard

Built to restore closed-loop fuel trim precision and emissions readiness on the G4GC 2.0L platform for reliable, CEL-free daily drivability.




Ajustement

Faire

Hyundai

Cylindrée

  • 2.0L

Année

  • 2010
  • 2011
  • 2012

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Hyundai Elantra (2010-2012) 2.0L

$34.95