Passer au contenu du produit
1 sur 3

O2 Oxygen Sensor Upstream Downstream for Honda Pilot (2012-2013) 3.5L



Prix normal $70.95
Prix promotionnel $70.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Sensor Kit for 2012-2013 Honda Pilot (YF3/YF4)

What it Does: This matched 4-piece O2 sensor kit monitors pre- and post-catalyst exhaust gas oxygen levels on the 2012-2013 Honda Pilot YF3/YF4 (J35Z4 3.5L V6) to maintain closed-loop fuel trim and catalyst monitoring.

The Stock Honda Pilot Oxygen Sensor Failure

On the YF3/YF4 Pilot with the J35Z4 3.5L V6, factory zirconia elements suffer thermal fatigue, carbon fouling, and heater burnout over high mileage. Because the J35Z4 uses Variable Cylinder Management (VCM), oil vapor and soot accelerate sensor tip contamination. As signal switching slows or heater resistance spikes, the PCM logs codes like P0135, P0155, P0141, or P0161 and exits closed-loop control.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light & DTCs: Triggers codes like P0134, P0135, P0155, or P0141 from slow response or open heaters.
  • Fuel Trim Imbalances: Skewed air-fuel feedback forces erratic fuel corrections, setting P0171 or P0174 with rough idle.
  • Poor Economy & Emissions Failure: Open-loop enrichment raises fuel consumption and prevents OBD-II readiness monitor completion.

The Direct-Fit Matched Oxygen Sensor Solution

This 4-sensor kit replaces both upstream and both downstream O2 sensors as a balanced Bank 1 and Bank 2 set. Each unit uses a fast-acting zirconia element inside a corrosion-resistant stainless steel housing with laser-welded shields for thermal durability. Direct-fit OEM connectors and factory-length leads allow plug-and-play installation without splicing, restoring rapid closed-loop voltage switching and catalyst monitoring on your YF3/YF4.

What's Included

  • 2 Upstream Oxygen Sensors
  • 2 Downstream Oxygen Sensors

Technical Specifications

Fitment 2012-2013 Honda Pilot
Engine / Chassis J35Z4 3.5L V6 / YF3/YF4
Sensor Configuration 2x Upstream & 2x Downstream Matched Direct-Fit Set
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)

Compatibility

  • 2012 Honda Pilot 3.5L (YF3/YF4)
  • 2013 Honda Pilot 3.5L (YF3/YF4)

Frequently Asked Questions & Fitment Warnings

Does this fit the YF3/YF4 Pilot?

Yes. This is a direct fit for the 2012-2013 Honda Pilot equipped with the J35Z4 3.5L engine. Verify your 3.5L engine before ordering; excluded from non-listed model years.

Will this clear P0135/P0155 codes and cover all four positions?

Yes. Replacing the matched set resolves sensor-induced P0135, P0155, P0141, and P0161 codes after a PCM reset, assuming intact wiring and fuses.

Is wiring splicing required for installation?

No. All four sensors include direct-fit OEM connectors for plug-and-play installation using a 22mm O2 sensor socket.

The Honda Precision Standard

Engineered for emissions compliance and PCM accuracy, this matched sensor kit keeps your J35Z4 running clean and CEL-free. Restore factory fuel trim precision without guesswork.




Ajustement

Faire

Honda

Cylindrée

  • 3.5L

Année

  • 2012
  • 2013

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Honda Pilot (2012-2013) 3.5L

$70.95