Passer au contenu du produit
1 sur 4

O2 Oxygen Sensor Upstream Downstream for Honda Accord (2013-2017) 2.4L



Prix normal $118.95
Prix promotionnel $118.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2013-2017 Honda Accord (CR2)

What it Does: This matched upstream and downstream O2 sensor kit monitors pre- and post-catalyst exhaust oxygen on the 2013-2017 Honda Accord CR2 K24W1 2.4L to maintain closed-loop fuel trim accuracy.

The Stock Honda Accord Sensor Failure

On the CR2 platform equipped with the direct-injected K24W1 2.4L engine, factory zirconia sensing elements suffer thermal fatigue and carbon fouling from high-temperature exhaust pulses and crankcase vapors. Over time, internal ceramic heaters degrade and resistive drift slows voltage switching across the 36531-5A2-A01 upstream and 36532-5A2-A01 downstream circuits. This sluggish response forces rich open-loop fuel trims, triggering P0133, P0135, and P0420 codes.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light & DTCs: Triggers P0135, P0141, or P0133 when heater resistance spikes or voltage lags.
  • Rich Fueling & Carbon Fouling: Skewed upstream feedback elevates fuel trims, causing tailpipe soot and rough cold idling.
  • Emissions & Economy Loss: Failed closed-loop control lowers MPG, triggers P0420, and fails OBD-II readiness monitors.

The Direct-Fit Matched O2 Sensor Solution

Replacing both sensors as a matched pair restores synchronized lambda feedback across the catalyst using direct-fit OEM geometry. Each unit uses a laser-welded stainless housing, breathable PTFE reference membrane, and fast-light-off ceramic heater built to withstand K24W1 2.4L exhaust heat soak. Factory-length harnesses with sealed OEM-style connectors plug straight into the CR2 chassis wiring without splicing, restoring tight closed-loop fuel control.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2013-2017 Honda Accord
Engine / Chassis K24W1 2.4L / CR2
Sensor Architecture Upstream Wideband AFR / Heated Downstream O2
Installation Type Direct Bolt-On OEM Replacement (No Cutting or Welding)
Replaces OEM Part # 36531-5A2-A01, 36532-5A2-A01, 365325A, 2344442, 2344581, 2344743, 2344786

Compatibility

  • 2013-2017 Honda Accord 2.4L (Confirm engine before ordering)

Frequently Asked Questions & Fitment Warnings

Does this fit the CR2 Accord?

Yes. This is a direct fit for the 2013-2017 Honda Accord equipped with the K24W1 2.4L engine. Excludes 3.5L V6 and 2.0L Hybrid models; confirm engine before ordering.

Will this clear P0135 and P0133 codes?

Yes. New sensors resolve heater faults (P0135/P0141) and slow-response codes (P0133) after drive-cycle resets, assuming intact wiring.

Are connectors plug-and-play?

Yes. Both include OEM-style sealed connectors for direct installation into CR2 exhaust bungs.

The Honda Precision Standard

Built for 9th-generation Accord emissions tolerances, this matched kit keeps K24W1 2.4L fuel trims crisp and CEL-free. Accurate lambda feedback protects your catalyst and fuel economy.




Ajustement

Faire

Honda

Cylindrée

  • 2.4L

Année

  • 2013
  • 2014
  • 2015
  • 2016
  • 2017

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Honda Accord (2013-2017) 2.4L

$118.95