Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for GMC Canyon (2004-2005) 2.8L



Prix normal $32.95
Prix promotionnel $32.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit O2 Oxygen Sensor Kit for 2004-2005 GMC Canyon (GMT355)

What it Does: This 2-piece oxygen sensor kit monitors pre- and post-cat exhaust oxygen on the 2004-2005 GMC Canyon GMT355 (LK5 2.8L) to regulate fuel trim and catalyst efficiency.

The Stock GMC Canyon Oxygen Sensor Failure

Factory oxygen sensors on the GMT355 chassis powered by the LK5 2.8L engine endure severe exhaust heat cycling, causing internal heater burnout and zirconia element contamination. Carbon soot and fuel additives gradually foul the sensing tip, creating sluggish voltage switching and biased air-fuel feedback. When a sensor fails, the ECM logs codes like P0135, P0141, or P0171 and exits closed-loop fuel control.

Common Symptoms of a Failing OEM Oxygen Sensor

  • Check Engine Light / DTCs: Heater or circuit codes like P0135, P0141, and P0420.
  • Rough Idle & Hesitation: Slow pre-cat switching skews ECM short- and long-term fuel trims.
  • Poor MPG & Failed Emissions: Rich open-loop fueling increases consumption and blocks readiness monitors.

The Direct-Fit Heated Zirconia Oxygen Sensor Solution

This matched 2-piece kit replaces both upstream and downstream sensors simultaneously to restore synchronized pre- and post-cat voltage switching on the LK5 2.8L engine. Each unit features a fast-response heated zirconia element, stainless housing, and factory-matched connectors for plug-and-play installation without splicing. Replacing both sensors together prevents a worn partner sensor from skewing fuel trims or triggering false P0420 catalyst efficiency faults.

What's Included

  • 1 Upstream (Pre-Cat) Direct-Fit Oxygen Sensor
  • 1 Downstream (Post-Cat) Direct-Fit Oxygen Sensor

Technical Specifications

Fitment 2004-2005 GMC Canyon
Engine / Chassis LK5 2.8L / GMT355
Emissions & Sensor Spec 4-Wire Heated Zirconia (Upstream & Downstream)
Installation Type Direct Bolt-On OEM Replacement (Plug-and-Play)
Replaces OEM Part # 3XSG277, 1X234-4087 (Mfr #: SD808364P4)

Compatibility

  • 2004 GMC Canyon 2.8L (Confirm connector style)
  • 2005 GMC Canyon 2.8L (Confirm connector style)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT355 Canyon?

Yes. Fits 2004-2005 GMC Canyon models with the LK5 2.8L engine. Excludes 3.5L I5 engines, 2006+ model years, and mismatched harness connectors.

Will this clear P0135, P0141, or P0420 codes?

Yes, if sensor-related. Clear stored DTCs after installation and complete a drive cycle so the ECM resets P0135, P0141, and readiness monitors.

Is wire splicing or special prep required?

No splicing required. Keep grease and anti-seize off the sensor tip, hand-thread the body before torquing to spec, and verify connector fitment.

The GMC Heavy-Duty Standard

Engineered for truck durability, paired oxygen sensing keeps the GMT355 running at stoichiometric precision under load, protecting the catalytic converter and emissions compliance.




Ajustement

Faire

GMC

Cylindrée

  • 2.8L

Année

  • 2004
  • 2005

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for GMC Canyon (2004-2005) 2.8L

$32.95