Passer au contenu du produit
1 sur 5

O2 Oxygen Sensor Upstream Downstream for Ford Transit Connect (2014-2015) 2.5L



Prix normal $68.95
Prix promotionnel $68.95 Prix normal
Livraison calculée au moment du paiement.
  • Ajustement garanti
  • Approuvé par des milliers de personnes
  • Garantie à vie

Vous le voulez bientôt ? Commandez dès maintenant !

I18n Error: Missing interpolation value "end_date" for "Se termine le {{ end_date }}"

Direct-Fit O2 Sensor Kit for 2014-2015 Ford Transit Connect (V408)

What it Does: This matched upstream and downstream O2 sensor kit measures exhaust oxygen on the 2014-2015 Ford Transit Connect (V408) 2.5L Duratec iVCT to regulate fuel trim and catalyst efficiency.

The Stock Ford Transit Connect O2 Sensor Failure

Factory oxygen sensors on the V408 equipped with the 2.5L Duratec iVCT endure severe thermal cycling and carbon soot buildup. Over time, internal zirconia elements suffer thermal fatigue, additive contamination, and heater circuit burnout. A lazy upstream sensor delays ECM voltage switching, while a degraded downstream unit misreads catalyst oxygen storage, triggering P0133, P0135, P0141, and P0171 fault codes.

Common Symptoms of a Failing OEM O2 Sensor

  • Check Engine Light / DTCs: Stored P0133, P0135, P0141, or P0171 codes from heater burnout or slow voltage response.
  • Rough Idle & Hesitation: Delayed closed-loop switching forces rich open-loop fueling and throttle stumble.
  • Reduced MPG & Failed Emissions: Over-fueling fouls spark plugs, risks catalyst overheating, and fails OBD-II readiness.

The Direct-Fit Zirconia O2 Sensor Solution

Replacing both sensors as a matched set restores synchronous ECM voltage feedback across the 2.5L Duratec iVCT exhaust stream. Each unit combines a laser-welded stainless steel housing, ceramic zirconia sensing element, and fast-acting heater circuit for rapid closed-loop transition. Pre-wired OEM-style connectors match factory 234-5176 and 234-4578 specifications, while precision thread-in geometry eliminates wire splicing and prevents exhaust leaks.

What's Included

  • 1 Upstream Oxygen Sensor
  • 1 Downstream Oxygen Sensor

Technical Specifications

Fitment 2014-2015 Ford Transit Connect
Engine / Chassis 2.5L Duratec iVCT / V408
Emissions & Sensing Element Heated Ceramic Zirconia / Upstream Air-Fuel & Downstream O2
Installation Type Direct-Fit OEM Replacement (No Cutting or Splicing)
Replaces OEM Part # 234-5176, 234-4578

Compatibility

  • 2014-2015 Ford Transit Connect 2.5L

Frequently Asked Questions & Fitment Warnings

Does this fit the V408 Transit Connect?

Yes. This is a direct fit for the 2014-2015 Ford Transit Connect equipped with the 2.5L Duratec iVCT engine. Excludes 1.6L EcoBoost models; confirm engine configuration before ordering.

Will this clear P0135, P0141, or P0133 codes?

Yes. Replacing failed 234-5176 and 234-4578 sensors resolves heater circuit and slow-response faults like P0133, P0135, and P0141 once DTCs are cleared and drive cycles complete.

Is wire splicing required for installation?

No. Both sensors include factory-style weatherpack connectors for plug-and-play installation; torque to factory spec using an O2 sensor socket.

The Ford Precision Standard

Engineered for commercial reliability on the V408 Transit Connect, this matched sensor pair maintains tight ECM fuel-trim control under daily payload duty. Expect restored fuel economy and CEL-free emissions compliance.




Ajustement

Faire

Ford

Cylindrée

  • 2.5L

Année

  • 2014
  • 2015

Garantie

Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

O2 Oxygen Sensor Upstream Downstream for Ford Transit Connect (2014-2015) 2.5L

$68.95