O2 Oxygen Sensor Upstream Downstream for Ford Mustang (2011-2014) 5.0L
Impossible de charger la disponibilité du retrait
- Ajustement garanti
- Approuvé par des milliers de personnes
- Garantie à vie
Vous le voulez bientôt ? Commandez dès maintenant !
Achetez en toute sécurité
Paiement sécurisé avec des prestataires de paiement de confiance.
Direct-Fit Upstream & Downstream O2 Oxygen Sensor Kit for 2011-2014 Ford Mustang (S197)
What it Does: This 4-piece upstream and downstream oxygen sensor kit monitors pre- and post-catalytic exhaust oxygen content on the S197 2011–2014 Ford Mustang 5.0L Coyote V8 so the engine control module can regulate air-fuel trim and verify catalytic converter efficiency.
The Stock Ford Mustang O2 Sensor Failure
Factory oxygen sensors on the S197 equipped with the 5.0L Coyote V8 endure severe thermal cycling, exhaust soot, and moisture condensation. Over time, internal heater elements open-circuit and sensing cells become contaminated or slow to respond, causing biased voltage signals and delayed closed-loop fuel trim switching. Replacing only one faulty sensor leaves aged partner sensors on the opposing bank, creating bank-to-bank fueling imbalances and triggering recurring P0135, P0155, P0420, or P0430 diagnostic trouble codes.
Common Symptoms of a Failing OEM Oxygen Sensor
- Check Engine Light & Heater/Circuit DTCs: Triggered codes such as P0135, P0155, P0141, or P0420/P0430 caused by slow sensor response, biased readings, or internal heater failure.
- Rough Idle & Throttle Hesitation: Corrupted pre-cat feedback forces the PCM into erratic long-term and short-term fuel trims, causing uneven combustion across cylinder banks.
- Higher Fuel Consumption & Failed Emissions: Rich default fueling degrades fuel economy, while unresponsive downstream sensors prevent emissions readiness monitors from setting.
The Direct-Fit 4-Piece Oxygen Sensor Solution
This complete 4-sensor kit (interchange 234-5113) services both upstream pre-cat and downstream post-cat positions simultaneously to restore uniform bank-to-bank air-fuel feedback. Each unit features application-matched OEM-style connectors, precision-threaded housings, and fast-acting internal heaters for immediate closed-loop operation without cutting or splicing generic leads. Keep grease and anti-seize off the sensing tip, hand-thread each body into the exhaust bung, torque to factory specification, and complete a drive cycle after clearing codes.
What's Included
- 2 Upstream (Pre-Catalytic Converter) Oxygen Sensors
- 2 Downstream (Post-Catalytic Converter) Oxygen Sensors
Technical Specifications
| Fitment | 2011-2014 Ford Mustang |
|---|---|
| Engine / Chassis | 5.0L Coyote V8 / S197 |
| Stock Engine Output | 412–420 hp / 390 lb-ft |
| Installation Type | Direct-Fit OEM Replacement (Plug-and-Play, No Splicing) |
| Replaces OEM Part # | 234-5113 |
Compatibility
- 2011-2014 Ford Mustang 5.0L (Confirm engine displacement, model year, and connector style against your vehicle before ordering)
Frequently Asked Questions & Fitment Warnings
Does this fit the S197 Mustang?
Yes. This is a direct fit for the 2011-2014 Ford Mustang equipped with the 5.0L Coyote V8 engine. Excludes 3.7L V6, 5.4L, and 5.8L models as well as other model years even when the body style looks identical; verify connector style before ordering.
Will replacing all four sensors clear O2 and catalyst codes like P0135 or P0420?
Yes, when worn sensors are the root cause. Replacing both upstream and downstream pairs resolves heater circuit and slow-response faults (P0135, P0155, P0141) and restores accurate converter monitoring; clear stored codes and allow a full drive cycle so readiness monitors run.
Do these sensors require wire splicing, and what prep is needed during install?
No splicing is required. Each sensor uses the direct-fit connector for the 5.0L application—keep grease and anti-seize off the sensing element, thread the body in by hand to prevent cross-threading, and tighten to specified torque.
The Ford Performance Standard
Balanced bank-to-bank air-fuel control is essential for crisp throttle response, high-RPM fueling stability, and consistent exhaust efficiency in your S197 Mustang. Refreshing all four sensors together eliminates asymmetric fueling drift and restores factory-grade ECU precision.
Ajustement
Ajustement
|
Faire |
Ford |
|---|---|
|
Cylindrée |
|
|
Année |
|
Garantie
Garantie
Tous nos produits sont couverts par notre garantie à vie limitée . Nous garantissons leur qualité. [ Voir conditions ]

Faire ses achats en toute sécurité
Sur notre boutique Shopify, votre sécurité est notre priorité. Voici comment nous garantissons une expérience d'achat sécurisée :
1. Transactions sécurisées : Nous utilisons un cryptage avancé pour protéger vos informations personnelles et de paiement, garantissant ainsi leur transmission et leur protection en toute sécurité.
2. Plateformes de paiement sécurisées : Notre boutique s’intègre à des plateformes de paiement sécurisées, garantissant ainsi le traitement sécurisé et efficace de vos transactions.
3. Protection des données : Votre vie privée est notre priorité absolue. Nous appliquons des politiques strictes de protection des données afin de garantir la confidentialité et la sécurité de vos informations personnelles.
4. Plateforme sécurisée : Shopify offre des fonctionnalités de sécurité robustes et une surveillance continue des vulnérabilités, garantissant un environnement d'achat sûr.
5. Marchands vérifiés : Nous sommes un marchand vérifié sur Shopify, engagé à fournir des produits authentiques et de haute qualité.
6. Des politiques transparentes : Nos politiques claires de retour, de remboursement et d’expédition vous offrent la tranquillité d’esprit, sachant que nous garantissons nos produits.
7. Assistance clientèle : Notre équipe d'assistance clientèle dédiée est prête à vous aider pour toute question ou préoccupation que vous pourriez avoir.
Faites vos achats en toute confiance sur notre boutique Shopify, où votre sécurité et votre satisfaction sont nos priorités absolues.
$113.95