Capteur d'oxygène O2 amont et aval pour Chevrolet Silverado 1500 (2003-2006) 4,3 L

Direct-Fit O2 Oxygen Sensor Kit for 2003-2006 Chevrolet Silverado (GMT800)

What it Does: This 4-piece upstream and downstream oxygen sensor kit restores closed-loop fuel trim control and catalyst monitoring on the 2003-2006 Chevrolet Silverado 1500 (GMT800) LU3 4.3L V6.

The Stock Chevrolet Silverado Sensor Failure

Factory narrowband zirconia sensors on the GMT800 LU3 4.3L V6 endure severe exhaust heat cycling, condensation, and carbon contamination. Over time, fouled platinum electrodes slow voltage switching while cracked ceramic heater elements spike circuit resistance. This forces the PCM out of closed-loop fuel control, triggering heater circuit faults like P0135 and P0155 alongside fuel-trim codes such as P0171 and P0174.

Common Symptoms of a Failing OEM Oxygen Sensor

• Check Engine Light / DTCs: Stored faults like P0135, P0141, P0155, or P0171/P0174 from open heaters or sluggish mV switching.
• Rich Running & Poor MPG: Skewed voltage signals cause over-fueling, rough idle, and tailpipe soot.
• Emissions Failure: Dead downstream sensors prevent catalyst readiness monitors from setting.

The Direct-Fit Matched 4-Sensor Solution

Replacing all four sensors as a matched set eliminates bank-to-bank switching lag on your GMT800 pickup. Each direct-fit unit utilizes a thermal-shock-resistant zirconia sensing element, an internal rapid-light-off heater, and a laser-welded stainless steel housing that seals out road moisture. Pre-terminated factory weather-pack connectors and OE-length harnesses ensure plug-and-play installation into stock exhaust bungs without wire splicing or signal interference.

What's Included

• 2 Upstream Oxygen Sensors
• 2 Downstream Oxygen Sensors

Technical Specifications

Compatibility

• 2003-2006 Chevrolet Silverado 1500 (4.3L V6 — 4-sensor setup)

Frequently Asked Questions & Fitment Warnings

Does this fit the GMT800 Silverado?

Yes. Fits 2003-2006 Chevrolet Silverado 1500 models with the LU3 4.3L V6. Excludes 4.8L Silverado, Tahoe, Sierra, and Yukon models; confirm your 4.3L engine before ordering.

Will this clear P0135, P0155, or P0141 codes?

Yes, when caused by worn sensors. Fresh upstream and downstream units restore proper heater resistance and voltage switching on the LU3 4.3L V6.

Is wire splicing required for installation?

No. All four sensors feature direct-fit OEM connectors for plug-and-play installation into your factory exhaust bungs.

The Chevrolet Heavy-Duty Standard

Built for heavy-duty thermal durability, this matched four-sensor kit keeps your GMT800 at stoichiometric efficiency. Balanced bank feedback protects catalytic converters and ensures CEL-free operation.